HEP!! New Case

[JJADAMS]

Hi All, I just got a new Lian-LI Case all Aluminum. I just put everything in. It will not boot up. When I press the power button, it kicks on then right off. Anyone have any idea what it might be? I have a antec 400 watt psu. Thanks in advance

 

[Mem]

Double check all connections,last resort would be to try booting with the board out of the case,btw check you don`t have too many standoffs under the motherboard,one might be shorting the board if it`s in the wrong position,don`t forget to try clearing the CMOS as well.

 

[JJADAMS]

Checked all connections and all seems connected right. Any other Ideas

 

[JJADAMS]

Thanks for your help, What I did was disconnected everything and just plugged in Motherboard, and it powers up. So I plugged in one at a time and all is well now. I had a connector that plugs into the ati 9700 pro card and I had that plugged into the floppy. I think thats what the problem was.

Thanks again

 

[ScrapSilicon]

Originally posted by: JJADAMS
Checked all connections and all seems connected right. Any other Ideas

Originally posted by: JJADAMS
Thanks for your help, What I did was disconnected everything and just plugged in Motherboard, and it powers up. So I plugged in one at a time and all is well now. I had a connector that plugs into the ati 9700 pro card and I had that plugged into the floppy. I think thats what the problem was.

Thanks again

so..you didn't follow Mem's advice the 1st go around .. ..glad you narrowed it down and up and running..