boomerang
Lifer
- Jun 19, 2000
- 18,890
- 642
- 126
It looks to me like the collar is bottoming out on the threaded stub protruding from the base of the sink. It's not compressing the sealing ring.
If you disconnect the trap, can you wiggle the tailpiece? If so, this is your problem. With the collar tightened fully, the tailpiece should be rigid.
I've only skimmed a few posts here.
The base of the sink is too thick for the assembly you bought. The stub does not have enough exposed threads for the tailpiece and collar to tighten fully.
If you disconnect the trap, can you wiggle the tailpiece? If so, this is your problem. With the collar tightened fully, the tailpiece should be rigid.
I've only skimmed a few posts here.
The base of the sink is too thick for the assembly you bought. The stub does not have enough exposed threads for the tailpiece and collar to tighten fully.