*HOT* Arctic silencers on clearance at SVC.com $9.99 each

[AMDMaddness]

They are at the top of the Clearance section http://www.svc.com/clearance.html good deals the NV silencer 1 fits the popular 6600/gt PCI-E and a bunch more

Compatibility info link http://www.arctic-cooling.com/vga1.php

 

[anandtechrocks]

Are you sure you can use NV Silencer 1 with 6600 GT, list only says 6600.

 

[AMDMaddness]

yup i have one on my 6600gt the NV6 just came out it has a slightly bigger heatsink.

 

[anandtechrocks]

Great thanks man!

That's PCI-E right?

 

[r00ki3]

Will ATI Silencer 2 fit an AIW 9600 Pro?
It says it will fit 9600 series (non pro, pro, xt) but nothing about AIW.
On newegg, there's one reviewer who said it doesn't fit the AIW 9600 SE.

 

[Goi]

Too bad no Silencer 5 for my 6800GT.

 

[khurios2000]

http://www.svc.com/avc-at4-r1.html

is it fits for C3D X800GTO?

 

[Super56K]

What about an Evga 6600gt agp? I can't remember whether these will work out or not. Something about ramsick clearence maybe?

Edit, now that I think about it(should have done that first) I think it's the Zalman cooler.

 

[AMDMaddness]

Originally posted by: r00ki3
Will ATI Silencer 2 fit an AIW 9600 Pro?
It says it will fit 9600 series (non pro, pro, xt) but nothing about AIW.
On newegg, there's one reviewer who said it doesn't fit the AIW 9600 SE.

Pretty sure you would need the ATI silencer 1 on that one

 

[AMDMaddness]

Originally posted by: Super56K
What about an Evga 6600gt agp? I can't remember whether these will work out or not. Something about ramsick clearence maybe?

Edit, now that I think about it(should have done that first) I think it's the Zalman cooler.

Dont think any of them will fit an AGP 6600gt as its chip is usually rotated 45 degrees and has a bridge chip that it wouldnt touch to cool.

 

[AMDMaddness]

Originally posted by: khurios2000
http://www.svc.com/avc-at4-r1.html

is it fits for C3D X800GTO?

Dont mark me on this but since the all of the X800/gt/gto/XL/pro coolers look alike i see no reason why it wouldnt fit.

 

[magnux]

Note, these are all Revision 1 units. Not that it really matters, I'm sure. But, just so you know..

 

[Jagercola]

Got one to make my C3D X800GTO quieter while OC'd. The Rev 2 makes better ram contact. My card has 2.0 nanosec ram crap anyway

 

[khurios2000]

Originally posted by: Jagercola
Got one to make my C3D X800GTO quieter while OC'd. The Rev 2 makes better ram contact. My card has 2.0 nanosec ram crap anyway

Can you post your idle/load temp using your silencer?

thanks

 

[Xyclone]

None compatible with the 6800. :thumbsdown:

 

[Jolt2]

Arctic Silencers are not made to fit any ATI AIW series of cards the last time I checked. Here is a link to the ATI Silencer 2 cooler that is used on the ATI 9600 pro and 9600 XT cards. Note that it is not listed for the AIW card.

http://www.arctic-cooling.com/vga2.php?idx=64&data=1&disc=

A note here about the fit of these coolers on the cards. Most card manufactures will vary the card design and/or compontent used on the cards. Some modifications to the cooler may be required to make it fit the card you are trying to mount it on. I had to grind out three spots on this cooler to make it fit my card because of taller capacitors that the card manufacturer used were in the way of the cooler. Check the fit of the cooler and modify as needed for your card.

 

[Slickone]

Originally posted by: magnux
Note, these are all Revision 1 units. Not that it really matters, I'm sure. But, just so you know..

What's different about Rev 1 & 2?

 

[puppyfriend]

The baseplates. Rev. 1 had a problem where the interface to the GPU was elevated. The problem was that it was rounded so it didn't make that great a contact with the entire chip. Along the sides you could slip a piece of paper between the GPU and the heatsink. So Rev. 2 is absolutely flat. Much better contact.

Having said that, Rev. 1 still performed very well. Techpowerup has reviews of Rev. 1 and Rev. 2 with all the differences.

Originally posted by: Slickone

Originally posted by: magnux
Note, these are all Revision 1 units. Not that it really matters, I'm sure. But, just so you know..

What's different about Rev 1 & 2?

 

[t3h l337 n3wb]

Nice, I just picked up an NV Silencer 1 for my 6600GT @ 80C overclocked.

 

[kamranziadar]

Umm are you guys sure it fits 6600GT PCIe

 

[ockky]

the ati 4 rev 1 has a slight clicking sound, that was later fixed with the next revision, it really annoys the hell outta me, so beware if you have a quiet system or room, you will probably notice it

 

[Connoisseur]

any of these fit the x700?

 

[pg22]

Will the ATI 4 Rev 1 work on an x800XT PE?

 

[Xyo II]

wow, I would just like to say, you might want to check the other clearance items too- a lot of those cables, fan controllers, and a thermaltake 480w psu, that has the front panel for fan controllers- are really hot. The cpu's are expensive, and I don't know about the motorcycles (motorcycles? wtf?), but those clearance items are cheap. Just ordered a bunch of stuff, and shipping was only $10

 

[imported_pez]

will arctic silencer 2 or 4 work on a regular ati x800?