That post is to add a fan to your graphics card, not you cpu.
A lot of people have been reccommending the GlobalWin FOP32's - so that seems to be a good choice.
As far as the Alpha PAL6035 - many others have told me this was one of the best for the KT7 board, which I have now ordered both. So it should work fine - I'd like to know where you saw info about it not fitting on the KT7 board though.
The Alpha PAL6035 is about double the price of the GlobalWIn, but it is a much better heatsink/fan unit - especially if you are going for 1 Ghtz. out of a 600mhz Duron. 1 Ghtz. is NOT rare with this! I've emailed several people that have done it with this setup and it's been stable for weeks so far: ABIT KT7 MB, AMD Duron 600mhz, Alpha PAL6035 HS/Fan, 128mb PC100 (or PC133) memory, etc.
Also, make sure to use thermal compound between the heatsink & CPU to make your hs/fan unit more effective - this can mean a difference of several degrees - which is very important when overclocking!
If anyone has theirs clocked at 900mhz or above, please post info here:
Motherboard:
Memory:
Heatsink/Fan:
Voltage:
Multiplier:
Clockspeed:
Add if I'm missing something!
I'll post mine when I get it & put it all together.