How hot is your XP2100+?

[gwlam12]

My friend's XP2100 + is running at 62C with a Volcano 7+ CPU and Arctic Silver 3 newly reapplied. This seems way too hot even with the case off. How hot is yours running at?

 

[MichaelD]

Running w/the case open is only beneficial if you have a bigass house fan blowing directly on the mobo. Good cases are designed to cool properly with the case CLOSED, not open.

Aside from the PS that has two fans, I have two exhaust fans and no intake fans at all. Antec 1040 case has a wide open front grill area. If you put your hand in front, you can feel the air being drawn thru the front grill.

Oh, My XP2100 @ 2.16GHz is surfing and playing MP3s as I type. 41C. UT2K3 gets it to 47-48C. 24hrs of Prime95 TT gets it to 49C. That's it.

EDIT
AX-7/ASIII/Vantec Stealth fan. *it's quiet too*

 

[clicknext]

Uh my XP2000 is, on average, 36 idle, 40 under heavy load.

This is with Volcano 7, ASII, 5 case fans (antec 1080), 2 PSU fans.

 

[nick1985]

36 idle, 43 full load

4 case fans, cheap @ZZ taisol heatsink, arctic silver

 

[drewski]

idle: 35
full load: 41

that is @ 2.25GHz & 1.8v vCore

i've got that Vantec Aeroflow HSF.

 

[MichaelD]

Originally posted by: drewski
idle: 35
full load: 41

that is @ 2.25GHz & 1.8v vCore

i've got that Vantec Aeroflow HSF.

Pics? What case and how many case fans/configuration? Those are damn nice temps!

 

[cowdog]

24 C case and 34 C CPU currently. At load my cpu gets up to 40-42C.
Temps from mbm. Sensor taped to side of cpu heatsink (as close to cpu as I could get) registers 89.5 F.

Tbredb 2100+
12x196 @ 1.775 vcore (1.79 according to mbm)
SLK 800 with YS Tech variable speed fan (set about mid point).
8RDA+
6 case fans (2 ADDA adjustable front in, 2 Vantec Stealth side in, 1 ADDA top out, 1 ADDA back out) - not the quietest system, but not bad. The ADDA fans, in particular, seem a bit loud and will be replaced with Panaflos.

 

[Shimmishim]

System: 29/29
CPU: 41/45

slk-800 with tt dumb fan 2

with prime95 though, it gets up to 48

weird....

 

[gwlam12]

so is the volcano 7+ just not good enough to cool the xp2100?

 

[BMdoobieW]

Full load (SETI): 43oF

2100+ @ 2290 MHz (12x190, 1.8v)

SK-7, YSTech Fan, AS3

Note: system isn't really 100% stable

 

[ctk1981]

Vantec Aeroflow cooler. Nanotherm Blue II compound applied
One 80MM intake, One 80MM exhuast case fan
Enermax 433 PS with dual fans with speed control
166FSBx13.5=2.241Ghz at 1.675V

Idle 33C
Full load under prime torture test: 37C

Pretty impressed with how this whole entire setup has performed thus far. Really liked the nanotherm blue II. Might give there XTC line a try next time, but this is doing great for now.

 

[Wintermute76]

2100+ @2040GHz

board 32/34C
CPU 34/39C

Antec Sonata w panaflo L1A 120mm exhaust and 80mm PSU exhaust
SLK-900 w/ AS3 and panaflo L1A 92MM

 

[wicktron]

Motherboard sensors have a large part to do with it also... Most Abit mobos overtemp quite a bit.

 

[bgeh]

Originally posted by: gwlam12
so is the volcano 7+ just not good enough to cool the xp2100?

i had the same problem
i had my heatsink or clip(forgot which one already) installed backwards and that gave me high temps

 

[pbroussard]

The V7+ is a fine hsf. You either have it installed backwards (unlikely, as it will run hotter than that) or you are reading the internal diode on the cpu which generally reads 20C higher than the onboard, under cpu sensor. My Epox 8k3a reads both, onboard reading is 37-38C, on cpu die reading is 57-60C.

Paul

 

[Bacinator]

Asus A7N8X Deluxe w/xp2100+
running @ 2.21 (170x13) 1.8v
Not 100% stable, will only run Prime95 for over an hour, but passes every other bench/cpu tester. Fairly certain it's my gig of Mwave $53(x2) DDR266 holding me back. I push FSB up a wee bit, and Prime95 will only run for a couple minutes. :disgust:


room 23C
mobo 24C, under heavy load only goes up 1C to 25C.
CPU 38C, under heavy load only 4 up to 42C.
Using Vantec Aeroflow, in an X-Spider case from XPcases.com (comes with 4 led fans, and PSU with dual fans).

 

[drewski]

Originally posted by: MichaelD

Originally posted by: drewski
idle: 35
full load: 41

that is @ 2.25GHz & 1.8v vCore

i've got that Vantec Aeroflow HSF.

Pics? What case and how many case fans/configuration? Those are damn nice temps!

from other people's posts these temps aren't too incredible! no pics at the moment.

it's a Fong Kai case. ambient temp is 21 (70F). there is a 120mm panaflo and 80mm generic in front and a 90mm exhaust. enermax PSU has the 2 fan set-up,

this morning it was @ 38c after running prime all night long. the ambient temp was 18, though so it looks like full load is 20 degrees above ambient?

 

[Mattlock]

Dumb question but what is the maximum temperature for this CPU?

What alarm temp to most set on Motherboard monitor for the CPU?

thanks,
Mattlock

 

[dnycompbuilder]

Not 2100 rev b but 2000+xp revA @1.897 330fsb 1.75V and im at 32 idle, 38 under prime95 torture test

 

[EXman]

My 2100 12.5x180 (2250Mhz) @ 1.775v with Alpha 8045 and a crappy low noise fan is now at:

40C Idle
45C Load

62C something is wrong IMO

 

[clicknext]

Originally posted by: gwlam12
so is the volcano 7+ just not good enough to cool the xp2100?

Should be perfectly fine for xp2100.

 

[clicknext]

Originally posted by: Mattlock
Dumb question but what is the maximum temperature for this CPU?

What alarm temp to most set on Motherboard monitor for the CPU?

thanks,
Mattlock

Max temp before it melts or something? I think AMD said something like 80 or 90, but that's way to high to be running it normally. I'd set the alarm to about 80.

 

[Shimmishim]

Originally posted by: EXman
My 2100 12.5x180 (2250Mhz) @ 1.775v with Alpha 8045 and a crappy low noise fan is now at:

40C Idle
45C Load

62C something is wrong IMO

depends on his mobo... some mobo's read temps all wrong....

mine is 44C max @ 1.75V (2.31 ghz)

idles at 40C

 

[BarryAZ]

I just set up a system with a Tbred XP2100+ -- running a 24 hour burn in with Win2K -- 47 degrees C here. Fan arrangement:

Dual fan Power supply
Fan on side of case (over the CPU)

Heatsink/fan -- GC 88 Cooler

 

[BarryAZ]

Oh -- one thing -- which XP2100 -- Palamino or Tbred -- the Palmino runs a lot hotter.