how to use multi/voltmeter to check resistance across L1 bridges?

[DizzyNT]

I believe i set it to horseshoe setting, but do i set it to 200, 2000, 20k, 200k, or 2000k.

thanks

 

[woodie1]

Yes, ohms is this symbol: (crap it doesn't work) well then the horse shoe.

Start out with a high setting, 20K maybe, and work down until you get a reading about mid scale.

 

[DizzyNT]

so it should have a reading of about what when i know it is unlocked?
thanx again

 

[fyleow]

It should be pretty low, nothing above 1000 Ohms. Also check to see if it has any continuity with the other bridges that it's not supposed to have.

 

[DizzyNT]

thanks!

 

[DizzyNT]

http://www.amdpower.com/sections.php4?op=viewarticle&artid=66

one other question on where to take readings (see above)
above it shows that you take it from the dot to left side of l1 then right side of l1
if so what should be the readings?
or is this wrong and do you just take it across the l1 bridges ?

 

[DizzyNT]

one other thing, my xp is green that doesnt mean i have to do something else like cut bridges ?
its xp 1900 with agoga

 

[MrHans]

§Ù
symbol didnt come out for me either...