I've got an MSI P35 Neo2-FR w/an E6300 @ 3.2gHz...idle 42c (core0) & 37c (core1), load 52c (core0) & 48c (core1).
I've got good airflow, I think...housed in a P182 using Slipstreams (Kaze-Jyuni 1200rpm) in the upper hdd cage, rear & top.
Previously, I was using AS Ceramique w/the Tuniq Tower's fan blowing towards the rear of the case. I read that the proper configuration was to have it blowing up.
I took the HS/F off, applied some IC7 according to manufacturer's specs, positioned it according to the manufacturer's specs & lapped it (E6300 is lapped as well). I honestly couldn't tell that much of a difference after going through all that.
Now i'm tempted to position the Tuniq back the way I had it (blowing towards the rear exhaust) to see if that makes a difference.
Do the temps shown above seem good/average/poor considering my setup?
Thanks in advance.
I've got good airflow, I think...housed in a P182 using Slipstreams (Kaze-Jyuni 1200rpm) in the upper hdd cage, rear & top.
Previously, I was using AS Ceramique w/the Tuniq Tower's fan blowing towards the rear of the case. I read that the proper configuration was to have it blowing up.
I took the HS/F off, applied some IC7 according to manufacturer's specs, positioned it according to the manufacturer's specs & lapped it (E6300 is lapped as well). I honestly couldn't tell that much of a difference after going through all that.
Now i'm tempted to position the Tuniq back the way I had it (blowing towards the rear exhaust) to see if that makes a difference.
Do the temps shown above seem good/average/poor considering my setup?
Thanks in advance.