i bought Antec TruePower True430 PSU 430W, and here's what i get :(

[Cha0s]

http://img169.exs.cx/img169/7140/untitled7sf.gif
note the voltage fluctuations.. vcore , -12v etc
WTF i had the same problem with my ghetto PSU (except the cpu was stable at 1.5V)

Anyone know what the "NC" connector does to a Gigabyte K8NS F10 ? because i didnt connect it (count find it)

 

[Brian48]

Unless you're having instability issues, don't worry about it. The rails read low on the Antecs, but they will provide more than enough power when you need it.

 

[John]

MBM shows your +5v rail is 18-20% off of spec....doubtful.

 

[I800C0LECT]

Probably just a spike...that's your "low" column for -12V sensor, otherwise I'd ignore it

looks like your fluctuations are pretty standard...are you having problems?

I bet that 3100RPM fan sounds like a tornoado

 

[Cha0s]

no problems, i just want my pc to be healthy

 

[loafbred]

Keep in mind that you're looking at motherboard readings, which are probably not accurate, and aren't representative of what the psu is doing. Check your psu with a multimeter while the PC is running under heavy load. You can check 12v and 5v on a 4-pin molex connector, and check 3.3v by using an orange and black wire from that funky flat connector. I've had two Antec True Powers, and neither fluctuated at all.

 

[Philippine Mango]

Originally posted by: loafbred
Keep in mind that you're looking at motherboard readings, which are probably not accurate, and aren't representative of what the psu is doing. Check your psu with a multimeter while the PC is running under heavy load. You can check 12v and 5v on a 4-pin molex connector, and check 3.3v by using an orange and black wire from that funky flat connector. I've had two Antec True Powers, and neither fluctuated at all.

 

[fstime]

Antec PSUs, over rated, sigh, well I dont know, I get all stable readings with MBM5.(11.92 with a TT 420 18A)

A64 3200+
3 Hard drives
6800NU

HIGH: 11.94
LOW: 11.92

 

[sauria]

Originally posted by: Cha0s
http://img169.exs.cx/img169/7140/untitled7sf.gif
note the voltage fluctuations.. vcore , -12v etc
WTF i had the same problem with my ghetto PSU (except the cpu was stable at 1.5V)

Anyone know what the "NC" connector does to a Gigabyte K8NS F10 ? because i didnt connect it (count find it)

Try testing them the best way:
http://forums.extremeoverclocking.com/showthread.php?t=137886