I THINK I found the problem some or having with K7T-Pro2A

[idkjs]

Or at least I found my problem. I have put 2 of these boards
in computers in the last two weeks. The first one I noticed
I had a heck of a time getting the cards in and the video was a little grainy. I thought it was the funky 16 mb Diamond card. I put the second in my computer and just changed over the cards from it. From the get go I had a lot of the problems some have reported. The first signal should have been I like to never have gotten the AGP and ethernet card ( thats the only two I used )installed. I have been fighting video problem now for two days and finally laid the box back on the bench and upon closer inspection I could see that the pins in the Video and ethernet card were NOT lined up. I fixed the ethernet card by just adjusting the screws on the bracket. I could not do that on the Elsa card I had to take the bracket OFF and that is how the card is in now( but not for long, the board is going back ) . THE HOLES IN THE ( or at least mine ) MOTHER BOARD ARE OFF JUST ENOUGH TO LET THE PINS SHORT. Sorry for the book but thats my story and Im sticking to it

erg

 

[AmbitV]

i think you might have misaligned the mobo with the right mounting screws

 

[idkjs]

I'll check that but I dont think so best I recall is that any other way and it wont fit the case at all but I'll take a look

Thanks
erg