- Nov 26, 2005
- 15,166
- 390
- 126
Availability: Out of stock.
ETA 3/23. This date is NOT firm, and is based solely on the limited information we have gotten. We will work to get them in as quickly as humanly possible, but we do not have an absolute date yet.
Originally posted by: TankGuys
ETA right now is 4/1. It's been pushed back a bit... getting this in isn't quite so easy as running down to the corner store and picking them up
Originally posted by: SuperSix
Originally posted by: TankGuys
ETA right now is 4/1. It's been pushed back a bit... getting this in isn't quite so easy as running down to the corner store and picking them up
Slacker.
Originally posted by: SuperSix
Originally posted by: TankGuys
ETA right now is 4/1. It's been pushed back a bit... getting this in isn't quite so easy as running down to the corner store and picking them up
Slacker.
Originally posted by: Gary Key
Originally posted by: chizow
Gary Key just posted a D0 Preview. These are retail samples from Tank Guys, so no cherry-picking ES invovled. So far the results are impressive, 4.3GHz @ 1.32V on air, HT ON. Looks like D0 is a pretty substantial improvement in both clockspeed and voltages/temps.
I'll probably end up grabbing one when MC gets them consistently in a month or two, but this C0 isn't a slouch by any means. 3.9GHz right now with HT ON @ 1.32V so far, 21x186.
The preview is updated, I am running all tests currently at 4.41 on just slightly higher voltages but with memory still at 7-8-7-20 1T, just at 2100 now. I have the second processor going to Raja who will test it on the Classified board with his cascades and LN2.
Originally posted by: SuperSix
Originally posted by: TankGuys
ETA right now is 4/1. It's been pushed back a bit... getting this in isn't quite so easy as running down to the corner store and picking them up
Slacker.
Originally posted by: ghost recon88
Originally posted by: SuperSix
Originally posted by: TankGuys
ETA right now is 4/1. It's been pushed back a bit... getting this in isn't quite so easy as running down to the corner store and picking them up
Slacker.
They've already had them instock and sold out
Originally posted by: Rick James
I don't know why everyone is so obsessed with the new stepping. If you're running good memory and have adequate cooling the C0 is FINE and produces.
Originally posted by: Pedros
Hello
This is my first post here. First of all, i'm Pedro an i'm writing from Portugal. Hope everyone is doing fine
Ok, this is my doubt. I have a P6T Deluxe with a 920 runing at 3.8Ghz @ 1.275vcore with Dominators C8 1600Mhz sticks ( 3x2). Can't get lower voltages and for higher clocks i need much more power. I'm runing a wc loop so i keep idle at low 30's and load at high 50's
I have the possibility to change my setup to a new D0 stepping and a new motherboard ... or the Gigabyte Extreme or the Asus P6T Dlx v2 or the Rampage II.
So, is it worth upgrading for the D0 or i won't get much different results?
Originally posted by: Pedros
Hello ashishmishra,
I'm running the chip @ 1.275vcore, 1.3 qpiv, 1.60v mems. All the remaining is on auto. Well, i tested it with OCCT.
I see lots of people running the same speed at lower voltages with lower temps. So that's why i'm asking this
But, 1.375v is way too much voltage for 3.8Ghz :| What's your batch number?
Originally posted by: Tweakin
You have a great chip. I need 1.3875 for 3.8 with HT to be stable, and to me that is way too much voltage for 24/7.
I'm sittin at 3.4 (200x17) with 1.29 and Pll at 1.82 with HT on. I'm ILP stable at 30 passes, and have ran Prime (small, large, and blend) for 24hr each without failure. I would like a DO, but I'm not going to as the jump to 3.8 will not return anything I need.
Originally posted by: Pedros
Well, tomorrow i will change my c0 for a d0 ... i will stay with the P6T Deluxe motherboard for now.... I was able to sell my C0
Originally posted by: Rubycon
I've never even seen a core crash in Prime when pushed too far - the machine just halts with a BSOD or kernel panic.