- Oct 23, 2002
- 17
- 0
- 0
So I got my mobo installed in an Antec case with the SmartPower 350w power supply, not too many problems other than the lack of front panel headers. Am I dumb, or does every case I've seen have a 3 pin 2 lead Power LED cable, whereas this mobo uses 2 pins, and as identified on the website, the pins make no sense whatsoever.
Anyhow, when I put the system into sleep mode (both S1 and S3), the system case fans continue to run while all other components power down. I previously had a Shuttle AK31 v2.1, and when I would sleep/suspend that, everything would power down, including fans.
Am I missing something obvious? The case fans are a 4-pin that came with the case - one in front of the hard drives and one at the rear of the case. Any and all suggestions would be appreciated
Chris
Anyhow, when I put the system into sleep mode (both S1 and S3), the system case fans continue to run while all other components power down. I previously had a Shuttle AK31 v2.1, and when I would sleep/suspend that, everything would power down, including fans.
Am I missing something obvious? The case fans are a 4-pin that came with the case - one in front of the hard drives and one at the rear of the case. Any and all suggestions would be appreciated
Chris