Idaho's Guide to The Slot A - Socket A DIY conversion kit.
Equipment:
* Slot A motherboard
* Socket A processor
* Soldering Iron
* Hefty Spanner
First, remove the old Slot A processor cartridge and bin it.
Now, take the soldering iron and, holding the end firmly in your left hand, smear solder all over one of the thin edges of your thunderbird. Make sure you smear a line of solder over to one of the pins on the underside. The chip will dynamically establish which pins are now in use and adapt.
Wedge the spanner into the slot next to the CPU and, by leaning back and forth, widen the slot.
Next, push the CPU sideways into the slot, gently, solder side down.
Leave the spanner lying across the motherboard, and boot up.
Simple