I have five 80mm CoolerMaster TLF-R82 LED case fans. 1 of them lights up and stays constant while blowing at top speed. 2 of them light up but pulsate and seem to be blowing only at about 1/2 speed. The remaining 2 don't light up at all and only seem to be blowing at the lowest possible speed.
Here is how I have them setup:
The top speed lit up fan is plugged into a 5v/12v external plug on the back of the PSU.
The pulsating fans are plugged into the mobo directly.
The unlit fans are plugged into "fan only" 4-pin plugs wired directly to the PSU.
My PSU is an Antec TRUEPOWER 550w.
I have a feeling the the pulsating and unlit fans are doing so because of the fact that they are running at 1/2 and minimum speeds.
Can anyone tell me how to make adjustments to my system so all my fans run at top speed and light up without pulsating??? Thanks in advance!
Here is my system specs for your reference:
P4 2.4c w/ stock HSF (not overclocking)
1BG Mushkin 3500 Level 2 RAM
Intel D875PBZ Mobo
2 WD SATA Raptor HDs
Antec TRUEPOWER 550w PSU
NVIDIA GeoForce 4 Ti 4400 128MB
SoundBlaster 5.1
LiteOn DVD-ROM
Samsung CD-RW
5 CoolerMaster TLF-R82 Case fans
Here is how I have them setup:
The top speed lit up fan is plugged into a 5v/12v external plug on the back of the PSU.
The pulsating fans are plugged into the mobo directly.
The unlit fans are plugged into "fan only" 4-pin plugs wired directly to the PSU.
My PSU is an Antec TRUEPOWER 550w.
I have a feeling the the pulsating and unlit fans are doing so because of the fact that they are running at 1/2 and minimum speeds.
Can anyone tell me how to make adjustments to my system so all my fans run at top speed and light up without pulsating??? Thanks in advance!
Here is my system specs for your reference:
P4 2.4c w/ stock HSF (not overclocking)
1BG Mushkin 3500 Level 2 RAM
Intel D875PBZ Mobo
2 WD SATA Raptor HDs
Antec TRUEPOWER 550w PSU
NVIDIA GeoForce 4 Ti 4400 128MB
SoundBlaster 5.1
LiteOn DVD-ROM
Samsung CD-RW
5 CoolerMaster TLF-R82 Case fans