i've hit 4.1 gig with Titan Amanda tec cooler sure can go more

[Duvie]

Originally posted by: markymoo
see all those magnificent claims how good core temp is because it takes the temp from inside the chip but you see it same temp as asus probe.

Soooo...i have seen screenshots that showed core temp was different then asus probe...what is your point?

I have seen temps that show TAT and core temp spot on with each other...What are you saying?


You just need to show a screenshot of your 4ghz running 2 cores under load of 1 hour...cause that is the only thing that is relevant to me. I dont run 1 instance of superpi 32m....Doesn't do anything for me...

 

[markymoo]

my point being on this occasion asus probe is accurate alongside coretemp.

here is another screenshot this time with 0804 bios with orthos.

cpu-z, orthos dual

 

[DrMrLordX]

Nice. Did you have to give it more volts to get it over 4 ghz?

edit: looks like the only distributor for Titan products (including the Amanda) is a company called Inland:

http://www.inland-products.com/titan.htm

They list no stock for the Amanda, but apparently you can bug a rep about it and get on a waiting list or something. Or other.

 

[markymoo]

i need to run it at 1.5+ over 3.8

 

[Markfw]

Originally posted by: markymoo
my point being on this occasion asus probe is accurate alongside coretemp.

here is another screenshot this time with 0804 bios with orthos.

cpu-z, orthos dual

Then why didn't you put coretemp in there too ?

 

[myocardia]

Originally posted by: Markfw900

Originally posted by: markymoo
my point being on this occasion asus probe is accurate alongside coretemp.

here is another screenshot this time with 0804 bios with orthos.

cpu-z, orthos dual

Then why didn't you put coretemp in there too ?

Because it reads 8-10°C higher? Of course, 4 Ghz on any type of air cooling is still very, very noteworthy, even with slightly high temps. Using any other software besides Prime95, or TAT, wouldn't give you temps anywhere near that high. That's an awesome chip you have there, Mark.

 

[sdsdv10]

Originally posted by: myocardia
That's an awesome chip you have there, Mark.

Is this then more a measure of how good his E6400 chip is rather than how good of a CPU cooler the Amanda is?

 

[enz660hp]

markymoo, PLEASE, just run tat, load up both cores at a reasonable overclock and say...1.5vcore?, and post a screenshot of that after at least 5minutes, that will give us accurate temps and a feel of how well this cooler performs. For example, here is my setup 1.35vcore set in bios, 3.2ghz.. all fans running at about 1200rpms, ambient is about 20c.

http://img221.imageshack.us/img221/6330/justsometempsqv6.jpg


update: 3.6ghz, 1.53vcore in bios, 20c ambient, blah blah blah...
TAT load:
http://img301.imageshack.us/img301/7606/moretemps1od3.jpg

dual sp2004 load...
http://img222.imageshack.us/img222/5180/moretemps2mf0.jpg


and here are some photos of my modded scythe...


http://img139.imageshack.us/img139/4598/untitled14dhc8.jpg
http://img99.imageshack.us/img99/3127/untitled32oi2.jpg
http://img231.imageshack.us/img231/1830/newsetuppic1fy9.jpg


see? That wasnt so hard was it??

 

[spinejam]

patiently awaiting the "proof is in the pudding" screenshots!