Actually the 2 multiplier is remapped to 6 if it?s a ctx core, 300?s weren?t to the best of my knowledge. You also have to make sure your mother board can handle it as in if it?s a split plane mb and can you get close to voltage spec. Try setting it to 2 times 86 to see if it will post the problem may not be with cpu but the mb if it posts and you have a 3.5 setting it should run at 301 but some 300 we not rated for 100mhz front side bus but 66mhz x 4.5. Also one other problem some older mb had timing circuits in them that utilized the cpu speed if that the case your cpu will not work at all ( though I highly doubt that this is the case.) My best advice is try low settings and work your way up. If it won?t boot at say 3 x 66 you have other problems or the cpu?s kaput.
<< Wives are like power tools, why have your own when you can borrow someone else?s : Me >>
:Q