lsman
Diamond Member
about MB will only occasionaly detect the HD and CD-Rom.
my exp. is this:
at first setup, my k7s5a will detect the HD and after a cold boot, it will "lost the memory of what HD" i had, but the rest of the setting is "saved". While the MB need 4-5 mins. to search my HD, which afterall said cannot find it.
The answer to my problem is that my WB HD has jumper said "Master", "Slave", "Cable select" and "SINGLE" drive. The hard drive is new and i test it before i move to this computer and i am careless to note the jumper setting. If your setting is a lone drive on the IDE1. Make sure it is set to "SINGLE" or "Cable select" (use the end of the cable to connect to the HD)
And may i suggest to reseat the RAM (and possible to start with 1 DDR first)
Tell me if you get some result.
my exp. is this:
at first setup, my k7s5a will detect the HD and after a cold boot, it will "lost the memory of what HD" i had, but the rest of the setting is "saved". While the MB need 4-5 mins. to search my HD, which afterall said cannot find it.
The answer to my problem is that my WB HD has jumper said "Master", "Slave", "Cable select" and "SINGLE" drive. The hard drive is new and i test it before i move to this computer and i am careless to note the jumper setting. If your setting is a lone drive on the IDE1. Make sure it is set to "SINGLE" or "Cable select" (use the end of the cable to connect to the HD)
And may i suggest to reseat the RAM (and possible to start with 1 DDR first)
Tell me if you get some result.