KG7-RAID problems with power-up

[Cybertopia]

Ok, I just bought a KG7-Raid from compgeeks using the NewEgg's Agoia 1600XP+ processor. I have plugged everything in correctly, which I believe. Now, when I try to start up the computer, the fans go on for like half a second then turn off. I cannot send power again until I unplug and plug the power back into the motherboard. I'm using the delta 300 watt powersupply and I tested it so it works fine.

anyone know any tips to fix my problem?? why the power goes on for only .5 seconds... I have the CPU fan connected to the fan 1 and the case fan connected to fan 4. i reversed the two fans, and still the same. and fan 2 is connected to a fan on the motherboard. hmm...

any help would be appreciated thanks.

 

[Cybertopia]

ok, i found the problem is the powersupply. it is the delta one that needs to be modded.

now i have another problem though. the fans power up fine and continously; however, nothing displays on the monitor. it is not the video card either, because it has been tested to be good. could it be the cpu?

thanks

 

[Zepper]

Usually CPU, RAM or AGP video card not seated properly or a drive data cable connected upside down or only on half the pins (usually floppy or zip drives). Also unplug the AC from the computer and do a CMOS clear per your manual's instructions.
.b.h..