KK266 owners, please assist.

[Junior77]

Checking my voltages with the via Hardware monitor, my voltages are:

vcore value =1.95v
2.5v value = .35v
3.3v value = 3.41v
5v value = 4.91v
12v value = 12.37v

Why is my 2.5v value only .35v? Is this normal?

My system is:
Iwill kk266
1333 Athlon running at 1400 (140*10)
768MB Crucial Memory cas2

Anything else you need to know, just ask.

 

[Junior77]

Bump. Damn man, this has been my second message regarding this issue. 3 days, and not one response.

 

[shearo]

Mine does exactly the same thing. Try checking in the BIOS PC Health section (or something like that), it will show what I believe to be the correct 2.5v voltage.

 

[Junior77]

Thank you very much shearo. Also, does you cpu fan header show rpms? Mine doesn't Only the system fan header (near the led headers) reads rpms. Any idea?

My bios doesn't read any 2.5v. Only the vcore voltage, 3.3v,5v, and 12v. No 2.5v.

 

[kgraeme]

According to the KK266 FAQ:

Why is the 2.4 volt value way down around 0.3 in Via Hardware Monitor or MBM? It's meaningless because the KK266 uses SDRAM and not DDR. It is there only for the DDR memory support that the chipset itself supports, but is physically not present. The voltage is floating due to no load, thus the weird looking low voltage.

 

[Yonguma]

Mine shows about the same readings. My cpu and case fan show rpms. just make sure your cpu fan has the sensor on it.

 

[panhead49]

my 2.5 value is .25 .......???? something wrong with hardware monitoring. on one of my reformats and reinstalls i had a normal voltage reading once.....wtf.........bios does show correct numbers

 

[Insane3D]

There is no 2.5v value on a SDRAM board....that is for DDR voltage......