liteon + Ritek G04 + nero = coasters

[mrweirdo]

I am having problems with my liteon ldw-411s drive burning my dvd-r ritek G04s. I have tryed both firmware version FS0F and FS0H plus i replaced my round ide cable with a new 80 pin ribbon cable. My system is :
ECS KS75A rev 1
amd xp 2100+
256MB DDR RAM
runing windows xp pro
nero version 6.3.0.0
powerdvd xp
pinnacle sudio 8.3

Everytime I try to burn a disk I get a session fixation error after the burn gets to 100% in nero. I have no clue what a session fixation error even is :/

here is a log of the burn.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 2:03:36 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 2:49:52 PM
Nero version: 6.3.0.0 (Nero Express)
Recorder: Version: FS0H - HA 1 TA 0 - 6.3.0.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: FS0H - HA 1 TA 0 - 6.3.0.0
Adapter driver: HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 5T030H3 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 5T030H3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-411S F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 52MB (54008kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.2.2004
UDF/ISO compilation
4:14:40 PM #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

4:14:40 PM #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

4:14:40 PM #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

4:14:40 PM #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

4:14:40 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

4:14:40 PM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-411S running

4:14:40 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

4:14:40 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

4:14:40 PM #9 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using DVD media

4:14:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2199823 (488:50.73)

4:14:41 PM #11 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

4:14:41 PM #12 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

4:14:41 PM #13 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:14:41 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2199824 (2199824) = #2199824/488:50.74
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199824 blocks [LITE-ON DVDRW LDW-411S ]
--------------------------------------------------------------

4:14:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON DVDRW LDW-411S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4505239552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2199824 | lead-out | 1 | 0x00 | 0x41

4:14:41 PM #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

4:14:41 PM #17 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

4:14:41 PM #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

4:14:41 PM #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)

4:14:41 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:14:41 PM #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 13:39,122 (819122ms) -> OK

4:14:41 PM #22 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode

4:14:41 PM #23 Text 0 File Mmc.cpp, Line 19397
Set BUFE: supported -> ON , SMART-BURN : ON

4:14:41 PM #24 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

4:14:41 PM #25 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:14:49 PM #26 Text 0 File Cdrdrv.cpp, Line 1276
16:14:49.528 - LITE-ON DVDRW LDW-411S\H1 T0 : Queue again later

4:28:48 PM #27 Text 0 File WriterStatus.cpp, Line 115
start writing Lead-Out at LBA 2199824 (219110h), lenght 0 blocks

4:28:48 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:28:48 PM #29 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 2199823

4:29:16 PM #30 SCSI -1176 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02

4:29:16 PM #31 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

4:29:16 PM #32 CDR -1176 File ThreadedTransferInterface.cpp, Line 1659
Session fixation error

4:29:16 PM #33 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1659
Could not perform end of Disc-at-once

4:29:16 PM #34 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was -1

4:29:16 PM #35 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

4:29:16 PM #36 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

4:29:16 PM #37 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 2:03:36 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 12:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Any Help would be apriated. Oh before i got this new 25 pack or Ritek DVD-Rs i have been using TDK wich are rebranded Ritek and I have had some success geting 3 out of 5 disks to burn successfull. The two worked and then the third one worked when i unchecked finalize disk.

 

[Shagga]

From what I can see the LDW-411 is not supported by Nero. However, are Ritek and TDK media the only media you have tried?

Found this...

Session fixation error writing lead-in
(Session fixation error writing lead-in)

This error occurs for the same reasons as given in Power Calibration area area nearly full .

Here is another list of Errors and the resolutions...

 

[zzzz]

Have you tried with other program?

 

[mrweirdo]

I have tryed the media that came with the drive i think it was tayo yuden or something like that but it was +r anyways even though it burned fine in nero. I havent realy tryed any other software because i dont want to install roxio for fear it might mess something else up worse. I do have it though so i guess i have no chioce :/
Will continue doing research though before i try it or make more coasters.

 

[mrweirdo]

hrm I found this by searching google for the error i was geting with nero.
http://www.coujo.de/ib/index.php?s=131c2c08481df6d11fd8c97cd1fbf7fc&showtopic=1334
Looks like they had the same problems. I just downloaded that utility reg checker tool of neros and it found some errors. It makes sense that it could be a software problem because i swaped out the ide cable, checked jumpers, and upgraded the firmware. I do have other burner software on this system one by pinnacle and the other with powerdvd it would seem.

 

[mrweirdo]

that regfix fixed it nero can now burn the dvds properly. Thanks everyone that replyed

 

[Dreadogg]

take all those log files and that crappy software and throw it out your bedroom window, nero's been less compadible and fubared from the start of DVD burning, anyone who tells you different has not been doing it long enough to know or is hard headed.

 

[mrweirdo]

hehe i should do that but then the only software i have is roxio :/
I dont even want to try that. Its still in its brand new box colecting dust lol

 

[PizzaDude]

Originally posted by: Dreadogg
take all those log files and that crappy software and throw it out your bedroom window, nero's been less compadible and fubared from the start of DVD burning, anyone who tells you different has not been doing it long enough to know or is hard headed.

nero = flawless

I use the exact same burner and Ritek G04's as well.