hey fellas, received the parts today, just got around to putting it all together a bit ago.
ran into a couple issues, one being the MB i got apparently has no IDE slots for IDE cables for hard drives or optical drives. i am re-using a sata drive, but my dvd burner i'm re-using is IDE. so i had to make a quick run to best buy and grab a SATA DVD burner for my windows installation. so that worked out.
also, when i had everything set up, ready for a power up test, i noticed when i turned the machine on, the CPU heatsink fan was not spinning. it was plugged into the 4 pin slot labled CPU Fan, just above the CPU. thought this was strange. i tried plugging it into the 4 pin slot labled Rear Fan, and powered it up; the fan spins fine now. is this anything to be concerned about? should i think about an RMA?
after these issues, i installed my win7 x64 on the hard drive. booted up, installed drivers and all, but i can't seem to get my dual monitors working, it's only recognizing my primary LCD monitor, and not my CRT monitor. any suggestions? video card drivers are installed, and the monitors are both plugged in via DVI, and the CRT is connected VGA -> DVI adapter.
last issue, my front case USB ports are not functioning, but i'm thinking i just plugged them in the wrong pins, i'll consult the motherboard manual to double check
other than that, the machine is running great, and very quiet!
thanks for the help fellas, i appreciate it
EDIT:
this video card is huge! unfortunately it's covering up like 3 or 4 of my SATA ports on my MB, but i'm lucky as i'm not using them, lol