Decided to do a SSF build within the M350 chassis with the following parts:
cpu | INTEL i3-2100T
mb | ASROCK H67M-ITX LGA 1155
hd 01 | SEAGATE MOMENTUS XT 2.5” ST95005620AS 500GB 7200 RPM HYBRID HD
hd 02 | WD 640 GB 2.5” WD6400BPVT
ram | AVEXIR 4GB (2x2GB) DDR3
hsf | STOCK
os | WINDOWS 7 HOME 64-BIT
parts! hd01 is inside the case (hd01 and case bought off [h]ard member) and not shown is hd02
hd01 clearance over stock hsf, still had a few mm to spare!
20-pin connector barely fits!
Questions.
1) Is there P4 connector like this 4-Pin P4 Mini Power Cable for PicoPSU-80 but longer than four inches? Might need one that's at least nine inches long, ten inches to be safe. If not, I might have to a Y splitter cable + 4 pin p4 power cable + molex to sata cable since I'll be using two HDs.
cpu | INTEL i3-2100T
mb | ASROCK H67M-ITX LGA 1155
hd 01 | SEAGATE MOMENTUS XT 2.5” ST95005620AS 500GB 7200 RPM HYBRID HD
hd 02 | WD 640 GB 2.5” WD6400BPVT
ram | AVEXIR 4GB (2x2GB) DDR3
hsf | STOCK
os | WINDOWS 7 HOME 64-BIT
parts! hd01 is inside the case (hd01 and case bought off [h]ard member) and not shown is hd02
hd01 clearance over stock hsf, still had a few mm to spare!
20-pin connector barely fits!
Questions.
1) Is there P4 connector like this 4-Pin P4 Mini Power Cable for PicoPSU-80 but longer than four inches? Might need one that's at least nine inches long, ten inches to be safe. If not, I might have to a Y splitter cable + 4 pin p4 power cable + molex to sata cable since I'll be using two HDs.