Rubycon
Madame President
- Aug 10, 2005
- 17,768
- 485
- 126
Ah inline sensors should not be at an elbow. Yes it will work but...
You should have just kept a T and put it inline and put the sensor through the top.
A pretty good inline holder for probe type sensors can be made from a 1/2" NPT PVC plug. Drill out the center 1/64" larger than the probe and secure with good epoxy such as Belzona. This can be screwed into a threaded T. If the probe needs to be removed you can replace with a standard plug and keep running with little interruption.
You should have just kept a T and put it inline and put the sensor through the top.
A pretty good inline holder for probe type sensors can be made from a 1/2" NPT PVC plug. Drill out the center 1/64" larger than the probe and secure with good epoxy such as Belzona. This can be screwed into a threaded T. If the probe needs to be removed you can replace with a standard plug and keep running with little interruption.