I just got a 2500+ mobile today in the mail. So i put it in my Abit NF7-S v2.0 and it booted fine. I started pushing it higher and higher. I have corsair pc2700 ram and got it up to a fsb of 215 before it started to crap out on me. So i lowered the fsb back down to 200 and then I thought I would lower the fsb a little and increase the multiplier of the cpu. Before I had it at a multiplier of 11. so i put it at a multiper of 13 and the fsb at 180 at a voltage of 2.0 Then it wouldn't boot so i reset the cmos and nothing. I even disconnected the battery and the mobo power and the power supply and waited for a couple of hours. Still nothing. That is why i am talking right now. I do not know what to do. I don't think the problem is the ram because i just put in my friend's stick of geil pc3500. I also tested the system with that memory and my old palamino athlon 2100+. Still nothing. I have a 9800xt, which I'm sure is not the problem.
If any of you have the NF7-S you know that there are 2 beeps at the beginning and that one is long and kind of a lower tone than the 2nd beep which is higher pitched and shorter. I do not get these 2 beeps at all.
I'm so mad right now. I had it running fine at like 2500mhz. AHHHHHHHHHHHHHHHHHH
If any of you have the NF7-S you know that there are 2 beeps at the beginning and that one is long and kind of a lower tone than the 2nd beep which is higher pitched and shorter. I do not get these 2 beeps at all.
I'm so mad right now. I had it running fine at like 2500mhz. AHHHHHHHHHHHHHHHHHH