MSI K7T266 PRO2-RU and AMD XP

[wolfpacrules]

Hi, I need help on a problem that I am having:
I had built the system and originally there were no problem, but today I noticed when the computer boot up it shows athlon 1050mz at the screen
opriginally it was showing XP 1600+. I don't know since when it started.
Can anyone help, please?
Thanks

 

[TheNeck]

sounds like the fsb is set to 100(200) instead of 133(266).

 

[flippinfleck]

Actually, a little bit of a dif situation but still the same.

I purchased the k7t266 pro2 board (no-raid) at the beggining of the month. Board came with a defective ram slot (#1) but I was willing to overlook that problem. Well, lo and behold it stopped recognizing the proc at 1.2 (amd 1.2 266fsb) but instead at 900.

I lost the option in bios to use 133fsb! I verified that the proc was good on another board, and the ram is not the problem.

RMA is your friend!

 

[SuperSix]

<< Actually, a little bit of a dif situation but still the same.

I purchased the k7t266 pro2 board (no-raid) at the beggining of the month. Board came with a defective ram slot (#1) but I was willing to overlook that problem. Well, lo and behold it stopped recognizing the proc at 1.2 (amd 1.2 266fsb) but instead at 900.

I lost the option in bios to use 133fsb! I verified that the proc was good on another board, and the ram is not the problem.

RMA is your friend! >>



Isn't there a 100/133 (200/266) jumper? Sure it's set correctly? You won't have the 133 option in the BIOS if the jumper isn't set. (Again, I'm not sure if this version has the jumoer or not.)