Here's the specs
KT3 Ultra motherboard w/latest bios
Athlon 1.4
350 enermax
2-256 2100 Crucial
2-80mm fans
Win98
Problem: With the cold weather I'm getting bored I guess. I'm running at 1.6 (12x133)@1.74v with an idle temp of 41-42c.
This is fine. However I see people with all these fsb settings 145, 149, 156, etc. I can't boot at any of these and I'm getting cranky. If I try for example 10x150 I lock up, can't boot, and either have to reset the board or wait for things to cool down before rebooting.
Is it primarily the limitations of the board itself?
I realize the chip itself won't do over 1.6.
My thinking is (which is a problem in itself) if I lower the multiplier and up the fsb I should get lower temps correct?
Your thoughts and wisdom usually sets me straight ans is appreciated!!!
thanks
habba9
KT3 Ultra motherboard w/latest bios
Athlon 1.4
350 enermax
2-256 2100 Crucial
2-80mm fans
Win98
Problem: With the cold weather I'm getting bored I guess. I'm running at 1.6 (12x133)@1.74v with an idle temp of 41-42c.
This is fine. However I see people with all these fsb settings 145, 149, 156, etc. I can't boot at any of these and I'm getting cranky. If I try for example 10x150 I lock up, can't boot, and either have to reset the board or wait for things to cool down before rebooting.
Is it primarily the limitations of the board itself?
I realize the chip itself won't do over 1.6.
My thinking is (which is a problem in itself) if I lower the multiplier and up the fsb I should get lower temps correct?
Your thoughts and wisdom usually sets me straight ans is appreciated!!!
thanks
habba9