- May 7, 2013
- 404
- 0
- 0
Just built my new Haswell rig:
Mobo: Gigabyte X87Z-UD5H (BIOS F7)
CPU Core i7-4770k
Cooling: Corsair H100i
I ran the test IntelBurnTest 2.54 on my rig which has not been optimised in any way, everything is stock including the regulation of the fans which I have hanging off the 100i and I have it attached to a SATA connector instead of the one of the board four pin connectors.
I did the measurement with CoreTemp 1.0 RC5. The ambient temperature was 26-27 degrees Celsius.
My idle temps were:
Core1 33
Core2 30
Core3 32
Core4 33
I did the test with hyperthreading active and the test done with IntelBurnTest set to Stress Level Maximum. The maximum temperatures were:
Core1 79
Core2 77
Core3 76
Core4 73
I then turned hyperthreading off and used the same IntelBurnTest settings as above and the maximum temperatures were:
Core1 73
Core2 72
Core3 71
Core4 69
Mobo: Gigabyte X87Z-UD5H (BIOS F7)
CPU Core i7-4770k
Cooling: Corsair H100i
I ran the test IntelBurnTest 2.54 on my rig which has not been optimised in any way, everything is stock including the regulation of the fans which I have hanging off the 100i and I have it attached to a SATA connector instead of the one of the board four pin connectors.
I did the measurement with CoreTemp 1.0 RC5. The ambient temperature was 26-27 degrees Celsius.
My idle temps were:
Core1 33
Core2 30
Core3 32
Core4 33
I did the test with hyperthreading active and the test done with IntelBurnTest set to Stress Level Maximum. The maximum temperatures were:
Core1 79
Core2 77
Core3 76
Core4 73
I then turned hyperthreading off and used the same IntelBurnTest settings as above and the maximum temperatures were:
Core1 73
Core2 72
Core3 71
Core4 69
Last edited: