- Jun 2, 2009
- 5,223
- 1,598
- 136
So I was away for 2 days, unplugged! my pc and when I came home and plugged it in again. When I press power button nothing. no fans, no led. nothing. I tried different outlets and disconnected the modular cable to no avail.
I checked the access point for measuring voltage on the motherboard. everything is 0. I wasn't sure that means anything. Should it show a voltage when PC is off? All modular cables also have 0 voltage.
I then googled and it mentioned if you test it outside of PC you need to short the power in pin with a ground pin using a wire or paper clip. So I did that. still, voltage was 0 on all cables.
So I can assume it just died? It was an expensive unit, enermax modu87+ (afaik from seasonic). Or did I mess up my testing? Just before I send it for RMA...still has warranty left.
I checked the access point for measuring voltage on the motherboard. everything is 0. I wasn't sure that means anything. Should it show a voltage when PC is off? All modular cables also have 0 voltage.
I then googled and it mentioned if you test it outside of PC you need to short the power in pin with a ground pin using a wire or paper clip. So I did that. still, voltage was 0 on all cables.
So I can assume it just died? It was an expensive unit, enermax modu87+ (afaik from seasonic). Or did I mess up my testing? Just before I send it for RMA...still has warranty left.