I posted this in the General Hardware section but received no answer so I am now posing here.
I have a shuttle AK31A and it has 2 extra USB headers onboard.
I also have a 5 1/4" bay mount [2-USB / Intake Fan] combo unit.
The problem is that the 2 MoBo Headers each have two rows of 5 pins in opposite directions as follows:
Row 1
pin 1) 5v DC
pin 2) Data-
pin 3) Data+
pin 4) Ground
pin 5) Ground
Row 2
pin 1) Ground
pin 2) Ground
pin 3) Data+
pin 4) Data-
pin 5) 5v DC
And the plug on my USB/Fan combo has both sides wired the same direction as follows:
Rows 1 and 2
receptacle 1) 5v DC red
receptacle 2) Data- White
receptacle 3) Data+ Green
receptacle 4) Ground Black
"No receptacle 5 for second Ground"
Also:
The Red 5v receptacles on each side are jumpered together
The Single Black Ground receptacles on each side are jumpered together.
My questions are as follows:
The plug is modifiable, so:
1) Can I simply re-arrange the wires in the receptacles so that they match the pin out on the MoBo?
2) Can I ignore the second ground pin on the MoBo, as the plug only has one black ground wire?
3) Can I ignore the fact that the Reds and Blacks were originaly jumpered together when they were next to each other?
I have a shuttle AK31A and it has 2 extra USB headers onboard.
I also have a 5 1/4" bay mount [2-USB / Intake Fan] combo unit.
The problem is that the 2 MoBo Headers each have two rows of 5 pins in opposite directions as follows:
Row 1
pin 1) 5v DC
pin 2) Data-
pin 3) Data+
pin 4) Ground
pin 5) Ground
Row 2
pin 1) Ground
pin 2) Ground
pin 3) Data+
pin 4) Data-
pin 5) 5v DC
And the plug on my USB/Fan combo has both sides wired the same direction as follows:
Rows 1 and 2
receptacle 1) 5v DC red
receptacle 2) Data- White
receptacle 3) Data+ Green
receptacle 4) Ground Black
"No receptacle 5 for second Ground"
Also:
The Red 5v receptacles on each side are jumpered together
The Single Black Ground receptacles on each side are jumpered together.
My questions are as follows:
The plug is modifiable, so:
1) Can I simply re-arrange the wires in the receptacles so that they match the pin out on the MoBo?
2) Can I ignore the second ground pin on the MoBo, as the plug only has one black ground wire?
3) Can I ignore the fact that the Reds and Blacks were originaly jumpered together when they were next to each other?