Originally posted by: lowtech
Same problem after unmount & disconnect the fan. All connection check, and all devices reseated.
Originally posted by: lowtech
I don't have another stick of ddr ram lying around to see if it is the ram fault.
Originally posted by: woolmilk
I had a soyo board with fan rpm monitoring.
The board shuts down after a seconds when the cpu fan is
not properly connected. It had also the problem that slow rotating
fans arent properly identified and the board shuts down even
with connected fan.
You could consult your manual to see if this feature is implemented.
Solution was to disable the monitoring in the bios after I was able
to boot with a faster fan installed.
Originally posted by: lowtech
I have try different fan header & have try disconnected all fans. And, also have try mouting the old fan back in place.
But, the power keep cutting out.
Power supply is a Sparkle SPI.
Was the fan swap the ONLY thing you did differently to the system? Maybe you pulled the heatsink away from the cpu in the process. Also try resetting cmos.