Need some assistance in overclocking my Q8200.
My system specs are:
Q8200
Asus P5Q-E
Asus Silent Knight 2
Corsair Twin2X2048-6400C5DHX 800mhz (5-5-5-18) 1.8v
I have a pretty stable system at 3.0ghz (429x7) FSB.
Temperatures are a little high,(63-65 degrees at 100% load) but I've googled alot and have found out that this processor either does get high temps or maybe just shows.
I have ran prime95 and 3dmark06 and all is well till 3.0ghz.
I want to take my clocks to 3.2ghz (457x7) FSB. Till 445x7 system boots and runs for a while unless you dont apply 100% load, but at 457x7 fsb, i either get a BSOD after windows login or the system haults as soon as i put like 10% load on the cpu.
For 3.0ghz (429x7) fsb my voltages are:
CPU voltage... 1.2635v
CPU GTL volt.....auto
CPU PLL VOLT.... 1.5V
FSB termination voltage.... 1.20-1.22
DRAM voltage... 1.8V
NB voltage... 1.10-1.12
SB voltage... 1.0
PCIE voltage... 1.50
Can you guys here help me to reach 3.2ghz stable??
I have seen here people have very low CPU voltages, but their NB are higher...
Does not the NB get hot?
Thanks in advance!
My system specs are:
Q8200
Asus P5Q-E
Asus Silent Knight 2
Corsair Twin2X2048-6400C5DHX 800mhz (5-5-5-18) 1.8v
I have a pretty stable system at 3.0ghz (429x7) FSB.
Temperatures are a little high,(63-65 degrees at 100% load) but I've googled alot and have found out that this processor either does get high temps or maybe just shows.
I have ran prime95 and 3dmark06 and all is well till 3.0ghz.
I want to take my clocks to 3.2ghz (457x7) FSB. Till 445x7 system boots and runs for a while unless you dont apply 100% load, but at 457x7 fsb, i either get a BSOD after windows login or the system haults as soon as i put like 10% load on the cpu.
For 3.0ghz (429x7) fsb my voltages are:
CPU voltage... 1.2635v
CPU GTL volt.....auto
CPU PLL VOLT.... 1.5V
FSB termination voltage.... 1.20-1.22
DRAM voltage... 1.8V
NB voltage... 1.10-1.12
SB voltage... 1.0
PCIE voltage... 1.50
Can you guys here help me to reach 3.2ghz stable??
I have seen here people have very low CPU voltages, but their NB are higher...
Does not the NB get hot?
Thanks in advance!