new bios for K7T PRO & PRO 2 version 1.8

[hclarkjr]

AMDzone is reporting that there is new bios out for these 2 boards but i cannot find it anywhere on the site. anybody have link for it? it is supposed to have new memory timing settings in it, so it looks like good upgrade. i tried running live update but it didin't show it either. thanx

 

[micron]

If it is anywhere it should be here.

 

[rempe]

ITs under the K7TPRO2-A got a pro2 and flased it good improvement memory bandwidth 368 to 418

 

[pugh]

So are you saying that it is for the K7T PRO mobo(MS-6330) ? Also should i flash my bios if iam not having problems at all? i play games fine ..what should i do ?

 

[rempe]

Its up to you? moore merory bandwidth means moore FPS.I was told that the 1.8 bios is fore all the K7T PROS.

 

[Liquidh2o]

did they finally add a fast writes option into this bios?

 

[hclarkjr]

i emailed MSI tech support asking them if this bios is for all the boards, will let you know what they say

 

[Mattster]

I flashed up to this release of the BIOS and have had no problems whatsoever. Things do seem a little bit quicker. I set the DRAM to auto-detect the SPD from the SDRAM.

To download, you have to select the BIOS for the K7T Pro2a. Apparently the BIOS will detect which board you have and add/subtract appropriate options from the BIOS (depending on hardware that is actually on the board).

 

[BAMAVOO]

I wish they would put it up for Auto update though...

Me gettin' Lazy

 

[Fermunda]

Here is a link to the page for download. Select the .exe file and you're good to go.

I read the "text" file from the download and all it says it K7T Pro, no "2" mentioned. Now it's time to try it!

 

[LuigiR]

I flashed both 3 6330 and 1 K7Tpro2 (not A) with Bios version 1.8 an they work fine, no problems at all...

BYE!

 

[FlipFlops]

I also flashed my K7T Pro with that bios and everything works fine. Supposedly if you let it determine your memory timings by spd it also enables bank interleave by default.

I've found one problem though. It won't let you set the fsb higher than 110mhz. With the 1.7 bios it won't let me either. If I revert back to the 1.6 then all is fine. Most people will say "you won't go higher than 110" but that's not true. I have been running my machine at 115mhz fsb for the last two months.