- Jan 29, 2014
- 704
- 438
- 136
System Information:
CPU: Ryzen 7 1700 at stock.
Motherboard: Gigabyte GA-AB350M- Gaming 3 (F2 Bios)
RAM: Kingston HyperX Savage Black 2800mhz CL14 (HX428C14SB2K2/16)
PSU: Silverstone ST75F-PT 750W Platinum
GPU: Radeon R9 390 (no issues with previous build)
SSD: Samsung 960 Evo
OS: Fresh install of Windows 10 Pro
Problems:
A)
The system is, to put it bluntly, unstable. I've had the following errors repeatedly
IRQL_GT_ZERO_AT_SYSTEM_SERVICE
IRQL_NOT_LESS_OR_EQUAL
PAGE_FAULT_IN_NON_PAGED_AREA
These errors occur seemly at random but I can easily replicate them by launching an 'intensive' application (3dmark [which also fails to load my system info], DOOM, and others.
I have run the windows memory diagnostic and it reported no errors.
B) BIOS issues
When I first had the build (motherboard,cpu,ram, gpu, and psu only) on the motherboard box I could interact with the UEFI fine.
Now I am unable to 1) enter the bios before windows loads 2) using recovery to boot to UEFI works but my mouse and keyboard are now seemingly dead while in BIOS.
I have reset the CMOS twice and the issue is still present.
C) The BIOS (when I was able to manipulate it in the beginning) showed the RAM at CL15 2133mhz. That doesn't make any sense. CPU-Z also shows CL15. I am unable to access the BIOS to try to change timings to 14 or 16 to see if that would help.
________
So yea the system in its current state is unusable. My best guess is its a memory issue because these sticks aren't on the approved list. It could be something else though and wanted to see what you guys thought.
CPU: Ryzen 7 1700 at stock.
Motherboard: Gigabyte GA-AB350M- Gaming 3 (F2 Bios)
RAM: Kingston HyperX Savage Black 2800mhz CL14 (HX428C14SB2K2/16)
PSU: Silverstone ST75F-PT 750W Platinum
GPU: Radeon R9 390 (no issues with previous build)
SSD: Samsung 960 Evo
OS: Fresh install of Windows 10 Pro
Problems:
A)
The system is, to put it bluntly, unstable. I've had the following errors repeatedly
IRQL_GT_ZERO_AT_SYSTEM_SERVICE
IRQL_NOT_LESS_OR_EQUAL
PAGE_FAULT_IN_NON_PAGED_AREA
These errors occur seemly at random but I can easily replicate them by launching an 'intensive' application (3dmark [which also fails to load my system info], DOOM, and others.
I have run the windows memory diagnostic and it reported no errors.
B) BIOS issues
When I first had the build (motherboard,cpu,ram, gpu, and psu only) on the motherboard box I could interact with the UEFI fine.
Now I am unable to 1) enter the bios before windows loads 2) using recovery to boot to UEFI works but my mouse and keyboard are now seemingly dead while in BIOS.
I have reset the CMOS twice and the issue is still present.
C) The BIOS (when I was able to manipulate it in the beginning) showed the RAM at CL15 2133mhz. That doesn't make any sense. CPU-Z also shows CL15. I am unable to access the BIOS to try to change timings to 14 or 16 to see if that would help.
________
So yea the system in its current state is unusable. My best guess is its a memory issue because these sticks aren't on the approved list. It could be something else though and wanted to see what you guys thought.