New sandybridge motherboard switch questions

[Mojoe128]

I am about to send for my new fixed sandy bridge motherboard but had some questions. I got an OEM version of windows 7. I have heard that oem windows installs are tied to the motherboard. Am I going to need a new windows key?

Also i figured i should get i decent heat sink now that i have to take out the processor. Does anyone have any good recommendations? Not looking for anything crazy just enough i can get a little overclocking in. Also what is the processes of cleaning off the old paste(using stock intel heatsink now) What is the best paste to get now?

Thanks for any help was hoping i wouldn't have to get into this stuff so soon.

 

[Diogenes2]

You won't need a new key - it might need to be re-validated, but should not be a problem..

I recommend the COOLER MASTER Hyper 212 Plus..

The thermal paste that comes with it should be fine..

 

[Hogan773]

Re: Windows - I shouldn't have to reinstall it right? It should boot up but MIGHT give me some sort of error like I need to call a number to reactivate?

I'd prefer not to have to reinstall all programs again.

 

[Diogenes2]

I did not have to re-install ..
I did have to validate, but it passed with no problems..

 

[Mojoe128]

Well that's good news about the windows install/code. I have heard that you need to clean the chip real good when changing heatsinks.....specifically when you have used a stock heatsink/thermal paste. Something about wax in the paste they use or something. What is the best way to remove the thermal paste from the chip? Also i am replacing a asus p8p67 pro......will the heatsink recommended fit with that board. I have seen some videos of people not able to install certain back plate style mounts.

Thanks again

 

[bankster55]

99% Isopropyl alcohol
the CM Hyper 212 will fit
As any thermalright with the 1156 bolt thru kit

 

[Mojoe128]

Cool.....OK Last question. Does anyone know if the CM Hyper 212 will fit into an antech 300 case? It is not the roomiest case in the world and that is the last concern i have before i order one

Thanks

 

[Raw75sy]

What Bios are u using? Having issues with 1305. Unable to overclock...

Steve G

 

[Diogenes2]

1305 here .. No problems with Overclocking ..

 

[promposive]

Cool.....OK Last question. Does anyone know if the CM Hyper 212 will fit into an antech 300 case? It is not the roomiest case in the world and that is the last concern i have before i order one

Thanks

Yes, I have an Asus P8P67, 2500K, Antec 300 illusion, and a Hyper 212 Plus. it all fits fine and runs great.

 

[Mojoe128]

Great....ordered one. Thanks for the help everyone