Athlon 3000+ S939 CPU
Chaintech VNF4 Vanilla Motherboard
Antec Titan 550 Case + Antec 550W Power Supply
Corsair Value Ram 1gb DDR400
Samsung Spinpoint 80gb SATA drive
GeForce 4 MX4000
YE-DATA Floppy Drive
Asus CDRW Drive
This is going to be a file server but we're still waiting for the 250gb drives to arrive.
The RAID card is a Highpoint RocketRAID 2220 8 port SATA II card but is definitely not the source of the issue.
The computer just won't post. This motherboard doesn't have diagnostic LEDs so I am just completely stumped. The comp doesn't even send a signal to the monitor. I have connected it to both a 42" plasma and 2405FPW via VGA and still no luck.
It turns on and the power and HDD LEDs are on. The HDD LED doesn't flash or pulse though. It's static like the power LED. I don't know what the deal is with that.
The video card isn't the issue. I swapped the MX4000 with my 6800GT and it still didn't work.
I swapped out the RAM with my own 1gb kit. Still no luck.
I swapped the Spinpoint with my 250gb western digital and still no luck.
There is absolutely nothing about troubleshooting in the brief Chaintech manual. Do you guys have any ideas?
Chaintech VNF4 Vanilla Motherboard
Antec Titan 550 Case + Antec 550W Power Supply
Corsair Value Ram 1gb DDR400
Samsung Spinpoint 80gb SATA drive
GeForce 4 MX4000
YE-DATA Floppy Drive
Asus CDRW Drive
This is going to be a file server but we're still waiting for the 250gb drives to arrive.
The RAID card is a Highpoint RocketRAID 2220 8 port SATA II card but is definitely not the source of the issue.
The computer just won't post. This motherboard doesn't have diagnostic LEDs so I am just completely stumped. The comp doesn't even send a signal to the monitor. I have connected it to both a 42" plasma and 2405FPW via VGA and still no luck.
It turns on and the power and HDD LEDs are on. The HDD LED doesn't flash or pulse though. It's static like the power LED. I don't know what the deal is with that.
The video card isn't the issue. I swapped the MX4000 with my 6800GT and it still didn't work.
I swapped out the RAM with my own 1gb kit. Still no luck.
I swapped the Spinpoint with my 250gb western digital and still no luck.
There is absolutely nothing about troubleshooting in the brief Chaintech manual. Do you guys have any ideas?