Just for an update, I bought the CPU it's a Xeon X5670 6 Core and it came about a month ago. Physically the cpu hasn't any damaged pins just scratches on the heat spreader. The first time i inserted the cpu, the whole system did not post but after restart it posted, but then comes an error of failed overclocking that i'am pretty sure comes from my board, i can pass the error but i have to enter the BIOS and exit without saving anything and if i restart the system it doesn't post until a seccond restart. Except this the CPU is recognized and it's working just fine. I've done some testing with prime95 with small ftts for an hour,a lot of gaming and it is working great without any crashes or driver problems. Strange thing is that when i overclock the CPU even a tiny beat the board posts correctly without the failed overclocking issue which is great, btw the cpu is a great overclocker, mine is clocked at 3.93Ghz with Turbo enabled which is great given the fact that i have CM412S. To sum up the gamble was worth it and at the end working x5670 for 50$ cannot be beaten no matter what. Cheers