- May 30, 2004
- 7,116
- 695
- 126
Hoping you guys can help me out. I'm pretty new to ocing AMDs but I've read quite a few articles and posts and I've experimented for awhile on mine. I think I've hit the peak of my chip's capabilities. Setup is in sig. I have it running at 2.53 (230x11) fairly stable. Prime95 runs fine when I run a blend torture test, 3dMark01-05, and HL2 but when I run a small FFT torture test I get errors pretty quick. Here are the settings in my bios:
Vcore- 1.5
Vdimm- 2.8
AGP- 66 (locked)
Timings- 2.5-2-2-10____1T____4xHTT
Temps are 39C@idle and 60C@load
I've tried loosening the timings, dropping the multiplier to 10x, and raising the fsb to 240 but I get BSOD before I even get into Windows. I've also tried 235x11 with above timings, which gets me into Windows, but crashes when I run HL2. Any ideas on how to get 2.6Ghz?
Vcore- 1.5
Vdimm- 2.8
AGP- 66 (locked)
Timings- 2.5-2-2-10____1T____4xHTT
Temps are 39C@idle and 60C@load
I've tried loosening the timings, dropping the multiplier to 10x, and raising the fsb to 240 but I get BSOD before I even get into Windows. I've also tried 235x11 with above timings, which gets me into Windows, but crashes when I run HL2. Any ideas on how to get 2.6Ghz?