- Jul 11, 2004
- 40
- 0
- 0
Hello, Im new here, and so far, ive already learned alot. My current system is as follows:
-AMD 64-bit 3200+ Newcastle running stock cooling
-ABIT K8T800 PRO Mobo
-OCZ Enhanced Latency Series Dual Channel Kits 184 Pin 1GB(512MBx2) DDR PC-3200
-400W PSU
The problem is when I started to OC it. I went into the bios and checked out the current settings. The FSB is at 204 and muliplier at 11 (max for multiplier). I then proceeded to bump it to 210 and 11. Worked fine which im running at 2314MHz. When i tried to go higher on FSB, it woulnt work. Lowering mult. to 10 and fsb up some still didnt work. Any suggestions.
P.s. voltage is at defult, dont know if i will have to change any voltage.
-AMD 64-bit 3200+ Newcastle running stock cooling
-ABIT K8T800 PRO Mobo
-OCZ Enhanced Latency Series Dual Channel Kits 184 Pin 1GB(512MBx2) DDR PC-3200
-400W PSU
The problem is when I started to OC it. I went into the bios and checked out the current settings. The FSB is at 204 and muliplier at 11 (max for multiplier). I then proceeded to bump it to 210 and 11. Worked fine which im running at 2314MHz. When i tried to go higher on FSB, it woulnt work. Lowering mult. to 10 and fsb up some still didnt work. Any suggestions.
P.s. voltage is at defult, dont know if i will have to change any voltage.