OCZ Platinum rev 2 pc3200

[malvare1]

what would be the best setting for this memory when im running an fx-55 oc to 2.71 gigs @13x210. it seems to be the highest i can go. memory is @2.5/4/10/3 t1 on an msi k8n neo2 platinum

any help ?

Thanks

 

[Mucker]

Although different from Ultra-D boards, here is a good thread on typical TCCD settings: http://www.xtremesystems.org/forums/showthread.php?t=57317

m

 

[fstime]

If those use TCCD which they probably do, no way they top out at 210 mhz.

Its very comon for that ram to do 300 fsb.

I would expect 280-290 if in fact it uses tccd.

Follow the link above, XS.org is the best ocing forum.


EDIT:

You can try lowering your CPU multi to somthing like 4x so the CPU is no longer a factor, this way you can keep pushing the memory to see where it tops out.

 

[malvare1]

ok I will try

 

[GuitarDaddy]

I have the same ram and its good stuff.

@ <215 it will do 1.5-2-2-5, @ 215-237 it will do 2-3-2-6, @ 237-255 it will do 2.5-3-3-7, and they max on my board at 288 3-4-4-10

Drop your CPU multi, and raise your HTT to maximize your ram

 

[AtaruMoroboshi18]

Anyone selling these particular memorys anywhere for a good price?

 

[malvare1]

bought mine from monarch computers,

 

[JohnAn2112]

Originally posted by: AtaruMoroboshi18
Anyone selling these particular memorys anywhere for a good price?

Atacom and Newegg should have them for <$200.

 

[fstime]

Keep your timmings at 2.5-3-3, 3-4-4 is really terrible, I'd take 250 fsb 2.5-3-3 over 280 3-4-4.

Another thing to watch for is the voltage.

TCCD can be picky about voltage, some actually clock higher with lower volts.

Play around with it.

2.6-2.8.

 

[malvare1]

on my board the settings are in this order
2.5/3/?=allows for a bigger number/3
what should I set this number to ? I on anandtech amd64 rewritting the rules that this number is a 10.
should i leave 10 or any other number for my rig

 

[Tweakin]

Originally posted by: malvare1
on my board the settings are in this order
2.5/3/?=allows for a bigger number/3
what should I set this number to ? I on anandtech amd64 rewritting the rules that this number is a 10.
should i leave 10 or any other number for my rig

It should go as follows:

First=2.5
Second=3
Third=10
Forth=3

 

[Zebo]

those should be runnin 2-2-2-8 1T at anything less than 215Mhz~!!!

 

[RussianSensation]

Achieving a balance with DDR600

This should help you figure out where the perfect balance for your ram is. At 210 however, you should run at 2-2-2 like Zebo said. Try lowering the multiplier and gunning for high FSB/high ram speed though to squeeze everything.

 

[unwhippable]

i am using the same ram.
if i were you, i'd try 270X10 with HHT at 3 or 4...
since your chip is way better than mine, i bet it can clock to 280X10 or evern 290X10.
you should be able to do all that at 2.5-4-3-6. if not, raise the timings incrementally to 2.5-4-4-10... that should def. work.

good luck

 

[bjc112]

Mine does 260 @ 3-3-3-7 1T

Mine is TCC5