Originally posted by: Wurrmm
HUGE PROBLEM!!!!
Immediately after installing XP pro, I installed my network driver and then copied over the SP1 from my other comp. Then I ran SP1. However after the logon, the comp hard locks!! EVERYTIME!!! I have done this 4 times!!! Does anyone know what I should do??
2.8GHz w/HT enabled
2x512 Corsair PC3500C2 at 400mhz 2-3-3-6 2.6v
WD1800JB on Serillel 2 set as IDE 1
Plextor CDRW on IDE 2 with Pioneer DVD slaved
GF3 Ti500
Intelimouse Explorer on USB
OfficeXP keyboard on PS2 port
This really sucks!!! :disgust::frown:
Originally posted by: JonnyBlaze
im up and running. using all default memory timings as of now. im going to get some benachmark software installed and then play wiuth the memory.
with corsair xms pc3500, what timings should i be able to run at?
thanks
Matt
Originally posted by: rival
hey does your ic7-g board say ic7-g on it? (between the ram and proc?
mine says ABit ic7 but the green chip to the left says ic7-g? whats the deal? i just saw a sshot of a ic7-g and it says ic7-g where mine says ic7
Originally posted by: JonnyBlaze
Originally posted by: rival
hey does your ic7-g board say ic7-g on it? (between the ram and proc?
mine says ABit ic7 but the green chip to the left says ic7-g? whats the deal? i just saw a sshot of a ic7-g and it says ic7-g where mine says ic7
mine is the same as yours.
says it on the sticker.
any luck with booting yet?
Matt
\Originally posted by: KillerBob
I don't know what's wrong with my rig? The most aggressive RAM settings I can use (and get into WinXP) are CAS 2, APD 5, R to C 3, and RP 3. Is there anything you guys do to run with the better settings? I'm running the P4 3.0G at default settings, and my RAM is Corsair XMS3500.
Originally posted by: KillerBob
Ahhh. The problem I have is with the IDE DVD RW on the IDE controller. My Barracudas are on the SATA Raid0 connections, and I am having BSODs, from vanilla installation of WinXP Pro, whenever I try and burn CDs, DVD, on either my Sony IDE RW or my Plextor SCSI CD RW.
Originally posted by: Intelligence3
Newegg has one of the better reseller ratiings out there. I actually liked their shipping. I got my rushed item just fine, and everything was packed well every time. Their RMA is supposed to be quite good.
Originally posted by: Grit
Originally posted by: Intelligence3
Newegg has one of the better reseller ratiings out there. I actually liked their shipping. I got my rushed item just fine, and everything was packed well every time. Their RMA is supposed to be quite good.
I'll vouch for that. I had to RMA my first two IC7-G's (Abit's quality control is NOT what it use to be). NewEgg is great, esp for RMA.s
Originally posted by: JonnyBlaze
\Originally posted by: KillerBob
I don't know what's wrong with my rig? The most aggressive RAM settings I can use (and get into WinXP) are CAS 2, APD 5, R to C 3, and RP 3. Is there anything you guys do to run with the better settings? I'm running the P4 3.0G at default settings, and my RAM is Corsair XMS3500.
im using the same cpu and ram and im running at 2-2-2-5. i just overclocked the fsb to 239 (240 wouldnt load windows).
what bios version do you have?