Originally posted by: DrStrange
Does anybody know if the Zalman 7000A CPU cooler will work with the revision 2.0 of this board. I am considering buying it but the Zalman site states that it needs the four mounting holes and the NF7S 2.0 is not compatible as it does not have them but I know the board does have them.
Are they maybe in the wrong position
Thanks
Peter
Originally posted by: Richdog
Spike USB 2.0 is enabled only when you have Windows XP Service Pack 1 installed, otherwise your hardware will run as USB 1.0 only. Install SP1 then go into device manager, click on your USB root hub driver and click 'Update'. Bob will then be your uncle.
Right now for my question! My extra USB ports (that fit in a spare PCI slot) that came with my NF7-S don't work! I've tried them in both the USB connectors on the motherboard and still I get nothing at all. I've tried updating the drivers numerous times with no success, has anyone got any tips for me to get the bloody thing working? Having only 2 working USB ports is killing me! :beer:
Originally posted by: CyNics
I'm thinking of setting up a 2nd PC since I have an extra pair of kingston hyperX pc3500 and an tbredB1700+.
planning to go with the nf7-s rev2.0.
does nf7-s rev2.0 have any compatability problem with the kingston hyperX pc3500?
Cuz I heard the hyperX pc3500 didn't work on nf7-s rev2.0 few months back but I'm not sure whether or not the problem still exist or have been resolved.
FYI, my hyperX pc3500 can be considered as one of the early batch of hyperx, bought it this in january 2003. So any problem?
Originally posted by: Spike
Originally posted by: Richdog
Spike USB 2.0 is enabled only when you have Windows XP Service Pack 1 installed, otherwise your hardware will run as USB 1.0 only. Install SP1 then go into device manager, click on your USB root hub driver and click 'Update'. Bob will then be your uncle.
Right now for my question! My extra USB ports (that fit in a spare PCI slot) that came with my NF7-S don't work! I've tried them in both the USB connectors on the motherboard and still I get nothing at all. I've tried updating the drivers numerous times with no success, has anyone got any tips for me to get the bloody thing working? Having only 2 working USB ports is killing me! :beer:
I all ready did this and then I ran the sisoft analyser to see what it came up with (two posts back I tell about the results) so I am still curious how to tell If I am running 2.0.
I also cannot get the bracket to work on the rear of my case. My case comes with two ports on the front of the case, both of which work just fine. The bracket USB ports do not work. Later today I am going to unplug my bracket and hook my front two ports into that header to see if the problems lies in the bracket or that header on the mobo. I will let you know what happened. Maybe we both got bad brackets...
-spike
Originally posted by: Noid
both should be lit when operating (in use)
The red LED indicates power to MB
Green indicates succesfull boot / operational I think
( version 1.2 )