**Official AMD T-BRED B O/C RESULTS 1700+/2100+**

[Shimmishim]

It seems that a lot of other forums are keeping track of these sort of stats. I figured might as well do it on ours as well!

So please put down your stepping, voltage, mult x FSB, RAM timing and brand, and what type of cooling. I'll try to make a database.


Stepping:
AXDA2100DUT3C
AIUHB0301MPMW


Speed:
2125 mhz
11.5 x 184
1.775V

RAM
Samsung pc2700 2 x 256 megs
2.5-3-3-7

Cooler
Thermalright SLK-800 with TT Smart (Dumb) Fan 2



Okay so please only post your speeds and such.... I'll update this thing as often as I can.

 

[Actaeon]

Stepping:
AXDA2100DUT3C
AIUHB0302RPFW
925594728063

Speed:
2405 mhz
13x185
1.9v (overvolts between 1.9 - 1.92)
51C Full Load (AS3 has yet to settle, I except sub-50C temps within a few days)


Ram:
Kingsmax PC3200 1x256mb
2.5-?-?-? (most aggressive, just not sure which)
2.8V

Cooler:
Alpha PAL8045 w/ 52CFM fan

EDIT: So far, Its pretty stable at 2.4ghz, with 1.85v, I ran over 200+ tests of SiSandras Memory and CPU benchmarks, so I think at 1.9v its safe as well. It failed at Prime95 with 1.85v, so I bumped up to 1.9v, and so far, its been running several hours. I think I hit my "max". I do believe my vcore is exceptionally high, and I can only hope that Thoroughbreds have a higher tolerances than P4s for voltages. Hopefully I hear about Tbreds dying before mine does.

 

[zodder]

Stepping:
AXDA2100DUT3C
AIUHB0301MPMW


Speed:
2158 mhz
13*166
1.75V

RAM
Corsair XMS2400 2 x 256 megs
2.5-3-3-6

Mobo:
Epox 8RDA+

Cooler:
Alpha PAL8045 w/ Panaflow 39cfm fan

Running Prime95 now to check for stabilty.
I have 2 sticks of Corsair PC3200 cas2 coming tomorrow, so I'll see what it can do with faster memory.

 

[Jen]

Stepping:
AXDA2100DUT3C
AIUHB0250XPAW


Speed:
2196mhz at 1.74 volts [13 x 169] [ idle temps 34/35c , full load 42/43c
2301mhz at 1.87 volts [13 x 177] [ idle temps 37/39c , full load 46/48c [not sure if this speed is stable yet]



RAM
Samsung pc2700
2.5-3-3-6

Cooler
Water Cooling

 

[adeno]

Stepping:
AXDA1700DUT3C
JIUHB 0245MPMW


Speed:
2411 MHz
12.5 x 192.88 MHz
2.00v
Full load temps: 28c


Ram:
Corsair TwinX pc3200 Low Latency 256mb (x2)
2.0-2-2-6


Motherboard:
EPoX 8RDA+ nforce2


Cooling:
Watercooling

 

[chizow]

Stepping:
AXDA2100DUT3C (1st batch from Newegg)
AIUHB0248MPMW

Speed:
2380MHz
12.5 x 190
1.80V (1.85V effective with A7N8X .05V overvolt)

RAM
Corsair TwinX 1024MB 3200LLPT
cas2-2-2-5-1T

Cooler
Thermalright SLK-800 with TT Smart (Dumb) Fan 2 on a Sunbeam Rheobus ver. 2.0 @ 3200rpms

Notes and Observations:
I ran this chip at 2430MHz for about 2 weeks @ 13 x 187 with Samsung PC2700, but it ran hot and loud. It also wasn't completely stable; Prime would halt anywhere from 3-6 hours in. I think much of it had to do with the RAM I was using. It also required 1.85V (1.90V effective) which I wasn't totally comfortable with and my TT Smart Fan 2 was blasting away at full throttle at 5500rpms!!! Its on a leash now and running and a very quiet 3200rpms while cooling my chip to 48C under load. Very pleased with the results. I'm confident this chip would do 12 x 200 for 2400mhz with relative ease as well, but my R9700pro/A7N8XD simply doesn't like FSB > ~192, so I'm kinda stuck at 190MHz.

Got my eyes on Barton 2500+ now though :Q

 

[RU482]

XP1700+

Stepping:
JIUCB 0250MPMW OEM from NewEgg

Speed:
1921 mhz
11.5 x 166
1.70V

Ram:
Corsair PC3500 @ 400Mhz
2.5 3-3-7

Mobo:
MSI KT4VL ($39 refurb )

Cooler:
Vantec all copper w/60-80mm fan adapter and variable speed fan ($7 refurb )

 

[BuckNaked]

Stepping:
AXDA2100DUT3C
AIUHB 0248MPMW

Speed:
2250 mhz
13.5x166
1.70v

Ram:
Corsair PC3200C2 1x512MB
2,2,2,6

Motherboard:
Epox 8RDA+

Heatsink:
Alpha 8045 with Panaflo L1A
AS3


Temps:
36-37C Idle
46-47C Full Load


jiffylube1024
No need to mod the CPU, just slap it in and go....

 

[jiffylube1024]

Finally got my B chip. It's a good one (boots and runs at 2.35 GHz with my crappy cooling!)


Note: Tbred A here, B to be posted soon (hopefully)
Stepping:
AXDA2100DUT3C
AIUHB week 49 (0249)


Stable (running) speed:
2.25 GHz
12 x 180
1.70V

Motherboard
Epox 8RDA+

RAM
Samsung pc2700 2 x 256 megs
2.5-3-3-7
(not stable @ 2-2-2)

Cooler
Volcano 9 @ 3000 rpm (only!)

Temps:
35+C Idle
up to 49C Full Load

 

[Dug]

Stepping:
AXDA2100DUT3C
AIUHB 0250MPMW

Speed:
2250 mhz
15x150
1.8v

Ram
Samsung pc2700 1 x 256MB
Crucial pc2100 1 x 256MB
2.5-3-3-6

Motherboard
Epox 8rda+

Cooler
Thermalright SLK-800 with 80mm Silencer

Prime stable. 36-38c idle 48-49c full load.

 

[human2k]

stepping: AXDA1700DUT3C-JIUCB

speed: 144 * 12.5 = 1800MHZ

RAM: Crucial 256M PC2100

cooler: Vantec CCK-6040

rig: see sig.

 

[lhampel]

Stepping:
AXDA2100DUT3C
AIUHB 0248MPMW

Speed:
2.34 GHZ (16X146)
1.80v
50~51C (full load)
43~46C (idle)


Cooling:
CoolerMaster HAC-V81 BASE COPPER ($15 Newegg)

I ordered two of these cpu's for my a7m266-d. modded the L5 bridge & set the CPU clock to 16.
These babies are rock solid.

 

[SHAGVIRUS]

nice scores ppl

just ordered 1700+ from newegg along with a epox 8rda+
512 cosair pc3200 cas2 comming also..

ne1 know the latest batch of 1700 from newegg good/bad ?

ill post back in a week after i get it rolling

 

[ea1077]

Stepping:
AXDA1700DUT3C
JIUCB 0250MPMW

Speed:
2100 MHz
12x 175
1.9V

RAM
Samsung PC2700 1 x 256 megs
2.5-3-3-7

Cooler
Thermalright SK-6 with Thermaltake 60mm fan

Epox 8RDA+
43C idle, 48C at full load
Tested stable with Prime95.

 

[amdwolfman]

Here is the INFo on The 1700 I just purchased

AXDA1700DUT3C

JIUCB 0251SPPW

9269427260108

dOES ANYONE HAVE ANY comments on this?,,,is it a "B"core?,,,all information greatly appreciatted

Thx all

 

[BuckNaked]

Originally posted by: amdwolfman
Here is the INFo on The 1700 I just purchased

AXDA1700DUT3C

JIUCB 0251SPPW

9269427260108

dOES ANYONE HAVE ANY comments on this?,,,is it a "B"core?,,,all information greatly appreciatted

Thx all

congrats, thats a "B" core TBred....

 

[m1ke101]

wow 2v? i had the impression that would be too high a voltage. So what is the highest safe vcore you should set? i'm at 1.75 right now for my cpu and i always thought 1.9 is the highest i should go.

 

[adeno]

I take it you mean me?

As long as you have decent cooling, you can surpass 2.0v (generally this means water cooling or other similar forms. People have been able to get these Tbreds up to 2.2v with extreme cooling. In my case, the SLK-800 with a 52cfm fan does the job and keeps the Tbred extremely stable at 2411 MHz @ 2.0v @ 51-52c full load temps.

 

[BigJ]

Reserving space, gotta hook up the rest of my system today in a new 8RDA+ and watercooling.

 

[redls1]

my xp 2100 is at 168 x 13 for 2188 at 1.63 volts. It an abit at7 board with samsung pc2700. Its at 47c under burn in test right now.

 

[Kubla Khan]

Stepping from Newegg:
AXDA2100DUT3C
AIUHBxxxxxxxxx

14 x 157 = 2200 mhz @ 1.8 volts

Memory timings 2.5-2-2-5
3 Sticks Crucial PC2100
640MB RAM
Alpha PAL 6035

 

[SHAGVIRUS]

from where ??

 

[dxkj]

Reserving Space (not sure why but everyone else was doing it ma!)

XP2100 in the mail from newegg
SLK-800
256 Corsair XMS3200 2-2-2-6
Epox 8RDA+

will post the stepping on monday when it is supposed to come and try to play with it as much as possible before work at night.

 

[Shimmishim]

Stepping:
AXDA1700DUT3C
JIUHB0302xPMW


Speed:
2170 mhz
12 x 180
1.775V

RAM
Samsung pc2700 2 x 256 megs
2.5-3-3-7

Cooler
Thermalright SLK-800 with TT Smart (Dumb) Fan 2


+700 mhz overclock on a $49 dollar processor

Coming soon: 0302 2100+

 

[BD231]

Originally posted by: Shimmishim
Stepping:
AXDA1700DUT3C
JIUHB0302xPMW


Speed:
2170 mhz
12 x 180
1.775V

RAM
Samsung pc2700 2 x 256 megs
2.5-3-3-7

Cooler
Thermalright SLK-800 with TT Smart (Dumb) Fan 2


+700 mhz overclock on a $49 dollar processor

Coming soon: 0302 2100+

Talk about a good deal :Q .