**Official AMD T-BRED B O/C RESULTS 1700+/2100+**

[pecel]

HELP me decide what cooler I should get for my 2100+ Tbred, please.

 

[TeamPSI]

I just installed my watercooling setup on the 2100+.
I have a Gemini high flow spiral waterblock, ProCore Combo, Via Aqua 1300, all in a closed loop with no reservoir.
Im at 2313mhz right now at 95deg F idle and 103 F during Prime 95 testing....Im thinking I can go higher fairly easily.

Ill be adding an iced down reservior soon and seeing what I can get then!

BTW: Its 86deg in my house right now.

 

[Jen]

TeamPSI how much voltage to overclock to 2313mhz ?




i'm at 2205mhz at 1.68 volts




Jen

 

[TeamPSI]

When I was air cooling it took 1.85v
I havent tried to reduce it lately. Ill see tonight if it will run lower.

 

[keitaro]

Figure I'll post mine up. It's not a big o/c but perhaps someone out there who wants a simple FSB bump like me will find it useful.

AXDA2100DUT3C, 9312657280265
AIUHB 0301MPMW

2162.72MHz (166.36 x 13.0) @ 1.60v

Crucial PC3200 512MB x 2
6t-3-3-2CL (tried a 6-2-2-2 timing but p95 didn't like it; and damn the power outage... making me lose my near-2 week uptime...)

ASUS A7N8X Deluxe, rev1.04 board, 1003 BIOS

Vantec Aeroflow VA4-C7040

(PS/note: Testing 2245.91MHz (166.36 x 13.5) @ 1.60v as of April 08, 2003; to be updated when done)
(update to above: back to 166x13 due to mysterious reboot that happened while I was asleep; up 24+ hours with new RAM timings)

 

[Shimmishim]

yeah... good job!

i love the fact that you can just change the fsb from 133 to 166 and voila! you have a nice overclock

 

[TeamPSI]

Im up to 2367 now...Prime95 testing looks good...

Time to go faster

 

[Shimmishim]

good job... keep going!!!

let's see if it can hit 2.4

 

[TeamPSI]

Jesus....
You have a 1700@2300

Geeeewizzz

 

[Jen]

Originally posted by: TeamPSI
Jesus....
You have a 1700@2300

Geeeewizzz

i seen one 1700+ at 3050mhz that was with promethia cooling



i seen quite a few 1700+s hitting 2400mhz to 2500mhz lately with low voltages


prime still running on mine ..........let it run overnight then i will take this 2100+ up another notch



Jen

 

[TeamPSI]

Ok....Prime is done...time to go faster

 

[Soulkeeper]

Originally posted by: pecel
HELP me decide what cooler I should get for my 2100+ Tbred, please.

I like the slk-800 with a nice variable speed 80mm fan
but many people don't like to spend over 25 bucks on a hsf so....

sk-6, ax-7, are also alright
you get what you pay for

 

[TeamPSI]

YAY Im on test 3 at 2401mhz!!!

 

[Shimmishim]

yeah...

well for me.. i hated priming overnight cuz i lost a lot of crunching time cuz i was in a race...

since the race is over now.. i have time to mess around more with my 2 processors i have laying around

1. 1700+ DLT3C 0307
2. 1700+ DLT3C 0310

the 0307 maxed out at 2.2 ish.. but i think i can tweak some more here and there and get it higher

the 0310.. hasn't been touched yet...

 

[TeamPSI]

Failed

 

[TeamPSI]

Seems to be doing fine at 2401@1.875v

Think thats too much voltage to run safely?

 

[Jen]

Originally posted by: TeamPSI
Seems to be doing fine at 2401@1.875v

Think thats too much voltage to run safely?

depends on tempurature and processor. some can take higher voltage safely while others cant





Jen

 

[TeamPSI]

Teamps are 106deg F at full load....Im sure its not too hot.

 

[Shimmishim]

too lazy to convert that to celcius...

 

[TeamPSI]

41deg

 

[Shimmishim]

that's pretty good for 1.875V...

acctually that's REALLY good for 1.875V.... i however wouldn't go beyond 1.85V

also... look at how many mhz you've improved while upping your voltage from 1.75 to 1.875V

if it's small, it's not worth it raising your voltage so high...

i.e. if you performance gain is only 50 mhz between 1.75 and 1.85.. i'd rather run at 2350 than 2400

 

[TeamPSI]

Naaa...it takes 1.85 to get to 2275

 

[DAPUNISHER]

My results for This CPU

This thread and the various Nforce2 threads inspired me to build another AMD overclocking boxen for myself after a substantial hiatus and I haven't been disappointed so thanx

 

[Jen]

Originally posted by: TeamPSI
Naaa...it takes 1.85 to get to 2275

2250mhz on another motherboard i was stable at 1.74 volts. this new abit nf7s is much better so its not takeing much in voltage to get it this far.



41c is same as i am running under full load. when room temps are in thier upper 80s i have seen 45c under load




Jen

 

[Mrspec3]

Stepping:
AXDA1700DLT3C
JIUHB 0308XPMW
9742597250143


Speed:
2614Mhz
1.95V


RAM
OCZ PC3500EL
6-3-3 cl2 at that time

Cooler
Alpha Pal 8045 with some sunnon fan.

Yes it's air cooled an no I'm not making this up

Screen shot

I will do all the priming once I get this new board working as I like it

Steve