Originally posted by: Yuppe
No and no.
This happen after install/using Pam to speed up 2 striped raptors.
If any been tru this hint me
Originally posted by: computer
Why do think Nvidia is "the devil"? I'm curious to know since I don't know what video card to use either. I have an AIW Radeon 7500 64mb, GeForce MX2 64mb, V4 4500 32mb, and Rage Fury Maxx 64mb. I guess the Maxx is out since there are no XP drivers for it except for what's on the XP CD. Probably none for the Voodoo either.ATI has the best Image Quality hands down for 3D and they are just as good if not better than Nvidia on 2D, but ATI isnt the devil like Nvidia
I say their the devil just because, umm not sure prolly a few things, like arrogance ("the way its meant to be played") and because they say their the worlds leader in "visual processing solutions".
But beyond that they are partners with another devil, AMD. They think they can takeover chipsets too.
They just generally annoy me...
Originally posted by: LA
HELLO ALL IM A NOOB TO FORUM HERE.
THE REASON IM HERE IS I HAVE THE P4C800 DELUX AND ALSO THE P4C800-E ON EATHER ONE OF THEASE I CANNOT PUT A OS ON A HARDDRIVE.
I TRYED EVERYTHING CHANGED MEM TRYED 5 DIFFERENT HADRDRIVES I ONLY PUT A VIDEO CARD IN, NO OTHER CARDS AND STILL I GET A BLUE SCREEN AS I START TO LOAD WIN XP PRO FILES ABOUT HALF WAY THROUGH IT BLUE ME WITH : PAGE_FAULT_IN_NONPAGE_AERA . THIS IS BEFOR THE FIRST AUTO REBOOT THAT THE OPERATING SYS DOSE WHILE IT LOADS . I TAKE THE SAME HARDDRIVES AND PUT THEM ON A 533 MOTHER BOARD OR A ATHLON AND THEY WORK FINE NO PROBLEM PUTTIMG OS ON. ONLY WITH THE P4C800-E AND NON E FSB MOBO DOSE IT GET STUCK AS I LOAD A OS. I TRYED 3 DIFFERENT BRANDS OF MEM TOO . ANY 1 KNOW THIS PROBLEM OR BETTER YET AN ANSWER TO THIS?
Originally posted by: IntelInsideIdiotOutside
Originally posted by: Yuppe
ASUS P4C800/Deluxe (875P)
Anyone figure out why and how to fix SP1 bug Windows Xp.?
When install Sp1 it frezze at logon screen.
lol! I know, you have a pirated version of xp?
Originally posted by: solrak
My Corsair TWINX 4000 was producing errors in Memtest at what I believed to be default MB settings.
It turned out that I had 1 thing manually set.
I can't remember what it was, as it's been some time.
The errors disappeared after I set that to auto, and my pc runs great.
I can OC my 2.6C to 3.2 (250FSB 1:1) and get no errors after 6 passes of Memtest.
I think my 2.6 can run stably at 3.4 too.
Btw, do I really need to buy a Northbridge fan for my P4C800-E if I OC to 3.2 or 3.4?
In fact, what should I buy to make sure my PC doesn't fry?
I'd appreciate any recommendations/advice.
P4C800-E Deluxe
1GB TWINX4000
P4 2.6C
Originally posted by: IronWolf11
Yes Computer, with Allow all it works. I know its very wierd, and having it in allow all defeats the purpose as you prolly already know lol...I even forced ports open and still nothing when in normal mode
Originally posted by: harvardian
Hi,
I am really confused. I have the following setup:
On the Intel ICHR5 SATA
1) WD360D
2) WD360D
On the promise controller:
1) Maxtor 160MB SATA
At first, I tried the two WD360's in RAID0 - No problem with the config program
Then I try to XP and the install does not see any disks, but both the Promise and Intel bios see them???
I changed to no Raid for the Intel and now I can see one of the WD360 drives.
What am I doing wrong?
Thanks,
Dale
Originally posted by: harvardian
Hi,
I am really confused. I have the following setup:
On the Intel ICHR5 SATA
1) WD360D
2) WD360D
On the promise controller:
1) Maxtor 160MB SATA
At first, I tried the two WD360's in RAID0 - No problem with the config program
Then I try to XP and the install does not see any disks, but both the Promise and Intel bios see them???
I changed to no Raid for the Intel and now I can see one of the WD360 drives.
What am I doing wrong?
Thanks,
Dale
Trininox, see my last post above, 2nd paragraph. ZA is ok, but it's a resource hog; it consumes more resources and memory over others.Why use a software firewall in the first place when you have firewall in your router?
If sysgate is giving you problems and your using a free version try Zonealarm or something.
Originally posted by: computer
Guys, on the P4C800-E Deluxe, can only ONE HD be hooked up to the PRI_RAID connector?
Also, what is the point of having only one of these connectors???? Shouldn't you have two IDE RAID connectors for IDE RAID functions? Using one means you have to slave one and get reduced performance. This seems to defeat the purpose of using IDE RAID in the first place! Since that is a PCI RAID chipset, you'd be better off using a PCI IDE RAID controller card with two separate ports.
Originally posted by: ThomS
I 'm sorry to ask such a foolish question but i just built a new computer using the p4c800 dlx and I can not find where in the bios to set the fsb/ memory frequency ratio. I have read the maual through and through and checked every option in the bios. This is driving me crazy. This is the first computer I have ever built so I have never overclocked a machine before but I think I understand the basics and this has me confused.
Thanks, Sorry.
Thanks for the input. So can anyone tell me if ONE hard drive can be connected to the PRI-RAID connector? I think I'm going to get this mobo now, and I need that "extra" IDE connector for my secondary "storage hard drive".The P4C800-E has one only Promise PRI_RAID connector. But you can connect TWO drives to it. I've never used it on my board, so I can't tell you how well it works.