It is a fast board. I removed my SBLive and found I improved performance significantly. Still, programs like WCPUID and CPU-Z cannot read anything about the memory except it's Kingston and 512 MB total. Even Sysandra gives an error message, but benches my peak at about 32800. I played some more with my most promising o/c, here's the results of some common benches. I also passed Gold Memory with these timings, but Memtest would not boot. I'm not even sure I'm running DCM, but I think I am... It also plays UT2003 with absolutely full graphics almost too fast for my 25ms LCD.
Anyway, some of it's BIOS specific, but these are the specs:
Overclock: Manual (250 MHz = 3.02 GHz)
Performance Mode: Turbo
Memory Freq: 320MHz
Memory Accel: Auto
DRAM Idle Timer & Refresh Rate: Auto
Mem By SPD
Graphic Aperture: 128MB
Rage 3D o/c 380/345
PCMark2002
CPU 7256
Mem 8734
HD 1217
Prime95 57-58C for 75 min
3dMark01 17283
3dMark03 5921
I'm trying out another o/c, which I believe will be my last. I figure at a 5:4 memory ratio I should max out at 270MHz FSB, but I got the dreaded BSOD from that o/c. I dropped it to 260 which gives me 3.16 GHz. I plan to run Prime95 with it overnight to see how it does, it's been running for 25 minutes now and it's reading 55-56C on ASUS Probe. I don't want it above 60, that's the rule. Here's what I have so far:
PCMark2002
CPU 7597
Mem 9072
HD 1242
3dMark03 5965
EDIT: I'm reading about people running 355-360 MHz FSB on this and the P4C800 (as reported by WCPUID). That puts them in the 5 GHz range.