I'm building my system this week and am wondering if some of you would confirm what I'm planning to set in my BIOS. I have to admit, I don't completely understand what all these settings mean, even after reading this whole thread as well as most of the ones linked to from here (such as at Overclockers and Xtreme Systems).
My system includes a P5B Deluxe, E6600 and 2GB Crucial Ballistix DDR2/1000 5-5-5-15. Do these settings all look good for a solid overclock? (I'm particularly unsure about the CPU Frequency, the DRAM Frequency and the memory settings...)
My system includes a P5B Deluxe, E6600 and 2GB Crucial Ballistix DDR2/1000 5-5-5-15. Do these settings all look good for a solid overclock? (I'm particularly unsure about the CPU Frequency, the DRAM Frequency and the memory settings...)
AI Tuning: Manual
CPU Freq: 400
DRAM Freq: DDR2-1067MHz (DDR2-1000)
PCI Express Freq: 120
PCI Clock Sync: 33.33MHz
Spread Spectrum: Disable
Mem Volt: 2.25v
CPU VCore Volt: 1.5000v
FSB Termination Volt: 1.450v
NB Vcore: 1.45v
SB Vcore: 1.60v
ICH Chipset Volt: Auto
Modify Ratio Support: Enabled
Ratio CMOS Setting: 7
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Tech: Disabled
CPU TM Function: Enabled
Execute Disable Bit: Enabled
PECI: Disabled
N Bridge
Memory Remap Feature: Disabled
Configure DRAM Timing by SPD: Disabled
CAS/RAS: 5-5-5-15 (Can't I do better here?)
DRAM WRite Recovery Time: 4? 5?
DRAM TRFC: 35
DRAM TRRD: 10
Rank Write to Read: 10
Read to Precharge: 10
Write to Precharge: 10
Static Read Control: Disable
Initate Graphic Adapter: PEG/PCI
ASUS PEG Link Mode: Auto
ASUS CGI: Auto
Southbridge: Auto