Hye guys, first post so go easy on me
Well i have read up to page 20 in this thread and my goodness it has helped me an unbelivable amout (thnx phile)
I still have one question though, here are my specs
p5w dh deluxe
ocz platinum ddr2 pc2-6400 (same as you a belive phile)
e6400 stock speeds
x1300
620w enermax liberty
zalman 9500 cooler
The question i have is, i was running orthos and it ran for 1 hour and 5 minutes until
1:Test 7, 4500 Lucas-Lehmer iterations of M16297569 using 896K FFT length.
1:FATAL ERROR: Rounding was 0.4990234375, expected less than 0.4
1:Hardware failure detected, consult stress.txt file.
1:Torture Test ran 1 hours, 5 minutes 1 seconds - 1 errors, 0 warnings.
1:Execution halted.
thats the first core and the second finished that same test 7 just before that one died and I belive it was fine. heres core 2s message when the test was ended
2:Torture Test ran 1 hours, 5 minutes 1 seconds - 0 errors, 0 warnings.
2:Execution halted.
I decided to continue (i though it was continuing may have been a new one?)
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15
CPU: 2136MHz FSB: 266MHz [267MHz x 8.0 est.]
CPU: 2137MHz FSB: 266MHz [267MHz x 8.0 est.]
9/30/2006 2:15 PM
Launching 2 threads...
1:Using CPU #0
2:Using CPU #1
1:Beginning a continuous self-test to check your computer.
2:Beginning a continuous self-test to check your computer.
1ress Stop to end this test.
2ress Stop to end this test.
1:Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length.
2:Test 1, 4000 Lucas-Lehmer iterations of M18274367 using 1024K FFT length.
2:Test 2, 4000 Lucas-Lehmer iterations of M18274369 using 1024K FFT length.
1:Test 2, 4500 Lucas-Lehmer iterations of M17432575 using 896K FFT length.
2:Test 3, 4000 Lucas-Lehmer iterations of M18074369 using 1024K FFT length.
1:Test 3, 4500 Lucas-Lehmer iterations of M17115073 using 896K FFT length.
2:Test 4, 4500 Lucas-Lehmer iterations of M17432577 using 1024K FFT length.
1:Test 4, 4500 Lucas-Lehmer iterations of M16815071 using 896K FFT length.
2:Test 5, 4500 Lucas-Lehmer iterations of M17432575 using 1024K FFT length.
1:Test 5, 4500 Lucas-Lehmer iterations of M16515073 using 896K FFT length.
2:Test 6, 4500 Lucas-Lehmer iterations of M17115073 using 1024K FFT length.
1:Test 6, 4500 Lucas-Lehmer iterations of M16515071 using 896K FFT length.
1:Test 7, 4500 Lucas-Lehmer iterations of M16297569 using 896K FFT length.
2:Test 7, 4500 Lucas-Lehmer iterations of M16815071 using 1024K FFT length.
1:Self-test 896K passed!
1:Test 1, 5300 Lucas-Lehmer iterations of M14942209 using 768K FFT length.
2:Self-test 1024K passed!
2:Test 1, 800000 Lucas-Lehmer iterations of M143361 using 8K FFT length.
1:FATAL ERROR: Rounding was 0.5, expected less than 0.4
1:Hardware failure detected, consult stress.txt file.
1:Torture Test ran 18 minutes 53 seconds - 1 errors, 0 warnings.
1:Execution halted.
2:Torture Test ran 18 minutes 53 seconds - 0 errors, 0 warnings.
2:Execution halted.
so i dont know what exactly is going on here, my comp doesnt crash or anything but i though that this would have lasted longer and with no errors.
any ideas?
EDIT: temps did not exceed 46 maybe 47c to my knowledge and i checked on it quite frequently