Originally posted by: yessir
Originally posted by: phile
Originally posted by: yessir
Hello again...
My memtest of the module ran for 9 hrs and found 3 errors on pass 11. I will be running removing one module and run with just 1 GB and also switch modules position and re-run. Are there any other things that I can do? Do I have to RMA this with OCZ?
My mem module is OCZ Platinum 2GB.
Thanks
3 errors after 9 hours is quite arguably an acceptable situation, especially if you don't have any problems in normal everyday use.
Can you summarize whatever problems you're having?
-phil
Thanks Phil...I am not having any specific problems. I have just eased into the operation of my build and was doing the memtest and orthos as recommended by you and others in forum(s). But I have consistently got ORTHOS & memtest provide errors when I run 1:1. I am going to do separate DIMM tests and get back.
Thanks
Just an update for the benefit for all. My set-up is very simple & runs stable on ORTHOS and MEMTEST (1 error after 20 hrs).
1. All AUTO on CPU config except manual clock & 380.
2. Disabled SPD, used 4-4-5-15 fro my OCZ Platinum, disabled DRAM Throtlling,
3. Since I have Zalman AT, it works better with Q-Fan turned on.
Core 2 6400 runs great at 3.05 GHz just fine with Zalman air cooling. Anytime I change vcore, or others, I get errors on ORTHOS or MEMTEST. So, I am concluding all tests for now and run with above forever I guess. BTW, using BIOS 1503.
Thanks to all and especially Phile...kudos to you!