lookin4dlz
Senior member
- May 19, 2001
- 688
- 0
- 0
Originally posted by: bgstewar
PCI-e is set at 100.
Set this to 102 & you should get a better oc. I went up over 1.5 vcore w/o being able to oc much before I read to do this...
Originally posted by: bgstewar
PCI-e is set at 100.
Originally posted by: vailr
@galperi1: try the latest JMicron drivers at station-drivers.com
Originally posted by: vailr
@galperi1:
Did you set up the raid array in the motherboard's raid setup bios?
Raid0 will be faster than a single drive, but also riskier. If either drive fails, you lose data on both drives.
Raid1 simply writes the same data to both drives; won't be any faster than a single HD.
Originally posted by: bgstewar
I'm desperate here folks.
With an E6600, I can't, for the life of me, get anywhere above 3.0 Ghz. I've tried just about everything I can think of. In fact, just to reach 3.0, I had to up the vcore up to 1.475! I have good G. Skill PC6400 mem at 5-5-5-15 and 2.1 v. My MCH, FSB, and PCI-e volts are all up 0.1 volts. PCI-e is set at 100. I have disabled C1E, CIA2, VT, etc. and all the necessary options so I can OC. I'm using Bios F11.
It seems my most stable OC at low voltage is 2.8 ghz. with 1.375 v. Did I just get unlucky with parts that don't want to overclock, or could I try something else? Update BIOS?
Originally posted by: broken sticks
I have an E6320, which apparently F11 BIOS has some extra support for?? What, exactly?
I'm just about to embark on an OC mission, and when I tried F11 & F12 bios' before my temps went up 15degrees at least, with no OC?! So I went back to F10. Were they just a more accurate read? I don't like constantly flashing the BIOS. And what exactly does the extra support for the 6320/6420 give me?
Originally posted by: Moishe
correct me if this is not the place to talk about the "S3".
I have the S3 F8 w/ bios
I play BF2 and the voip in BF2 will not work with the realtek onboard audio on the P965-S3.
I have searched and searched to no avail and am simply wondering if anyone has found a solution.
BF2 can only use the default audio input device. It's notoriously finicky, but particularly with onboard audio.
My mic works fine in windows/BF 2142, but not in BF2.
I have tried:
the 0% threshold trick
updated drivers of all kinds
stock settings for CPU/RAM/video/everything
Any ideas/tricks, I'll try them, thanks. And please refrain from telling me to spend money on a new sound card.
Originally posted by: charger2000
Hi
I have a problem with the audio input, ALL the inputs are disabled, either from the Windows Control Panel and the Realtek panel, Mic, Line in, CD Volume are all greyed out, tried to uninstall and reinstall latest drivers but with no results.
The audio out is from spdif to HDMI (MSI Diamond Plus), the internal audio connectors, to front panels, have been detached.
any idea ?
Nik