Originally posted by: SteveOCZ
Originally posted by: AMDxx165xxfx60
steve,
any bh5 around still ?
i'm looking for ram that could do 275 range , don't really care about timings or voltages
BH-5 isn't going to do 275FSB nor does it come in 1GB sticks.
If you want 275FSB I would take a look at this set
http://www.ocztechnology.com/products/m...r_pc_4000_gold_gx_xtc_2gb_dual_channel
- Steve, You say that the GX can do 275? I own that set, how would you suggest I go about getting them to run at 275HTT 1:1? I have a DFI NF4 Ultra-D bios date 06/23/2005 w/ A Venice 3000 (9x Multi) and the best I can get stable is 260 1:1 or 250-255 w/ dividers. I would like very much to have 275@1:1, and there are others trying very hard to get these to work above 260 too!
EDIT: Bios settings are as follows, passed 10 hours of Prime95 InPlace Large FFT's
FSB Bus Frequency............................. 287 MHz
LDT/FSB Frequency Ratio....................... 3
CPU/FSB Frequency Ratio....................... 9
PCI eXpress Frequency......................... 100
CPU Voltage .................................. 1.325v
Special VID .................................. 123%
LDT Voltage .................................. 1.40v
ChipSet (NF4) Voltage ........................ 1.70V
DRAM Voltage ................................. 2.80v
+0.03 if not 3.2V ............................ Disable
Memclock (DRAM Frequency) .................... 180
1T/2T Timing (Command Per Clock).............. Enable
CAS Latency (Tcl)............................. 3T
RAS# to CAS# delay (Trcd)..................... 4T
Min RAS# active time (Tras)................... 8T
Row precharge time (Trp)...................... 3T
Row Cycle time (Trc).......................... 11T
Row refresh cyc time (Trfc)................... 16T
Row to Row delay (Trrd)....................... 3T
Write recovery time (Twr)..................... 3T
Write to Read delay (Twtr).................... 2T
Read to Write delay (Trwt).................... 3T
Refresh Period (Tref)......................... 3120
(TWCL) ....................................... Auto
DRAM Bank Interleave.......................... Enabled
DQS Skew Control.............................. Auto
DQS Skew Value................................ 0
DRAM Drive Strength........................... Auto
DRAM Data Drive Strength...................... Level 2
Max Async Latency............................. 8ns
DRAM Response Time............................ Normal
Read Preamble Time............................ 6ns
IdleCycle Limit............................... 256
Dynamic Counter............................... Disable
R/W Queue Bypass.............................. 16x
Bypass Max.................................... 7x
32 Byte Granularity........................... Disable (4 Bursts)
CPU clock: 2585MHz
Memclock: 258 (CPU/10)