Ok guys, everything ok so far with these settings. I will try later to lower the vcore a little.
Earlier today something really weird happened though,
Today I completed the pull push setup with the two noctua af14 flx that arrived. Yesterday I was cooling the radiator with just one fan because of missing an adaptor for the other.
I was doing stress testing today with a setting of 1.35v core and 4.6ghz, 35 mins no problem in aida64, temps in the low 80s I stopped the test.
Repeated the same test then crashed in the 2 min mark.
Restarted, set 1.36v core and 4.7ghz. Booted up, tested and BOOM!, it hit 100C under load. BSOD
Only one increment of .01v made the cpu temps raise 15-20 degrees.
Restarted, booted up, set the old 4.6 1.35v setting, which was supposed to yield temps in the 80s like before and guess what, BSOD, 100C under load.
Strange isnt it?
Since then I lowered the clock and the voltage to the settings I have now, however the temps never were quite like they were before. I cant understand this.
Im overclocking in asrock extreme6.
Temps idling are in the 30s. But this sudden change under load iis inexplicable to me.